Nokia1680c local Test Mode Solution ....,
Sunday, August 31, 2014
Sasmung S3850 No Network fix problem
HTC Butterfly Tips and Tricks
How to Factory Reset (Hard Reset) HTC Butterfly
Resetting your HTC Butterfly will restore the default settings of your device. It will also delete all your files on your phone, so it is recommended to have a backup of your important files on your computer. There are two ways on how to reset your HTC Butterfly. It can be done through the settings or through the hardware buttons.
Resetting HTC Butterfly on Settings:
Resetting HTC Butterfly by Hardware Buttons:
These steps is also helpful when your HTC Butterfly is unresponsive or frozen and theres no way to access the settings.
How to Import Contacts From Old Phone to New Phone (on iPhone, Samsung, HTC and Nokia)
Contacts is very important for everyone of us. We cant connect to our friends without a contact number. If you have a new phone, saving contacts on the phone one by one is so hassle. But now, theres an easy way how to transfer or import your contacts from your old phone to your new phone.
Use your PC to transfer contacts to your new phone. This process is applicable in several phone brands, including iPhone, Samsung, HTC and Nokia.
You just need an Internet Connection on your PC, your old and new phone and their own USB cable.
If you are not prompted with a pop-up window to install the PC Companion, you can also download the PC Companion here.
How to Take Continuous Camera Shots on HTC Butterfly
Follow these steps:
1. First, make sure that youre in Normal scene to use this feature.
2. On the Viewfinder screen, just press and hold on
.
- It should take 20 consecutive shots since it is the default settings.
- If you want to capture more than 20 shots, just tap on the Gear Icon or Settings, then Continuous shooting. After that, clear the Limit to 20 frames option.
3. You can also select the photo that you like most by tapping Best shot. If you dont want the other photos, then you can delete it.
How to Set HTC Butterfly into Sleep Mode
Like any other device, setting HTC Butterfly into sleep mode will somehow save its battery life. Sleep mode puts your device into a lower power state while the display is off. It also prevents accidental button presses when its in your pocket or bag. Heres how you can set HTC Butterfly into sleep mode.
1. Briefly press on your devices Power button to turn off the display. Then switch to Sleep Mode.
2. To change the time before your device sleeps, just go to Display, then gestures & buttons settings.
3. To wake it up, manually press the Power button and unlock your screen.
4. Your device will also automatically wakes up when you have an incoming call.
How to Extend Battery Life of HTC Butterfly
• Turn on the power-saving option on the device (if applicable).
• Lessen the screen brightness and the screen lock timeout.
• Turn down your device volume with the volume keys.
• Close any apps or features when you are done using it so they will not continuously running in the background.
• Turn off the network connection if you are out of range so that your device will stop searching for a network signal.
• You should use the latest version of the software update. Software updates improves some features and fixes some bugs on the previous software version.
• Turn off the camera flash.
• The camera viewfinder can be a power drain, so after youve finished taking photos.
How to Make Your HTC Butterfly a Wireless Router
Smartphones these days can now share its mobile data connection and act as a portable Wi-Fi hotspot. And like those high-end gadgets, HTC Butterfly is sure to let you experience the benefits of making it as a portable Wi-Fi hotspot. Heres how you can make your HTC Butterfly phone the next Wi-Fi hotspot.
Read More..
Resetting your HTC Butterfly will restore the default settings of your device. It will also delete all your files on your phone, so it is recommended to have a backup of your important files on your computer. There are two ways on how to reset your HTC Butterfly. It can be done through the settings or through the hardware buttons.
Resetting HTC Butterfly on Settings:
- Slide the Notifications panel open, and then tap the Gear Icon or Settings.
- Select Backup & reset.
- Tap Reset phone.
- Then tap Reset phone, on the Reset phone screen.
- If you want to delete the files on your HTC Butterfly, tap OK.
These steps is also helpful when your HTC Butterfly is unresponsive or frozen and theres no way to access the settings.
- First, press and hold the Volume Down button, and then do the same way on the Power button.
- Hold the two buttons until the three Android images appear on the screen.
- Release the button when the three Android images appear and press Volume Down.
- Tap on Factory Reset, and then press the Power Button to confirm.
How to Import Contacts From Old Phone to New Phone (on iPhone, Samsung, HTC and Nokia)
Contacts is very important for everyone of us. We cant connect to our friends without a contact number. If you have a new phone, saving contacts on the phone one by one is so hassle. But now, theres an easy way how to transfer or import your contacts from your old phone to your new phone.
Use your PC to transfer contacts to your new phone. This process is applicable in several phone brands, including iPhone, Samsung, HTC and Nokia.
You just need an Internet Connection on your PC, your old and new phone and their own USB cable.
Then you need to install the PC Companion program. This is a free application and the installation files are already saved on your new phone. This program can also be used in updating your phone software.
Please note that if you are using the Microsoft Windows 7 operating system on your PC, make sure that the AutoPlay setting is enabled.
To check your settings:
Click Start > Control Panel, then type "autoplay" on the search box. Click the AutoPlay, and mark the check box Use AutoPlay for all media and devices.
Installing the PC Companion:
Installing the PC Companion:
- Turn on your new Phone and connect it to your PC.
- On your new Phone, tap "Install" to install PC Companion on the PC.
- On your computer, if a pop-up window that appears notifies you about available PC Software, select Run Startme.exe.
- Then click Install to start the installation and then follow the instructions to complete the installation.
If you are not prompted with a pop-up window to install the PC Companion, you can also download the PC Companion here.
Transferring your contacts to your new phone:
- Make sure that PC Companion is installed on your PC.
- Open the PC Companion application on your PC.
- Then click Contacts Setup and follow the instructions to transfer your contacts.
Want to take photos continuously on your HTC Butterfly? You just need to set the settings and you can now capture the moment of the action. Every movement of the action counts, so take the photo continuously.
Follow these steps:
1. First, make sure that youre in Normal scene to use this feature.
2. On the Viewfinder screen, just press and hold on
.- It should take 20 consecutive shots since it is the default settings.
- If you want to capture more than 20 shots, just tap on the Gear Icon or Settings, then Continuous shooting. After that, clear the Limit to 20 frames option.
3. You can also select the photo that you like most by tapping Best shot. If you dont want the other photos, then you can delete it.
How to Set HTC Butterfly into Sleep Mode
Like any other device, setting HTC Butterfly into sleep mode will somehow save its battery life. Sleep mode puts your device into a lower power state while the display is off. It also prevents accidental button presses when its in your pocket or bag. Heres how you can set HTC Butterfly into sleep mode.
1. Briefly press on your devices Power button to turn off the display. Then switch to Sleep Mode.
2. To change the time before your device sleeps, just go to Display, then gestures & buttons settings.
3. To wake it up, manually press the Power button and unlock your screen.
4. Your device will also automatically wakes up when you have an incoming call.
How to Extend Battery Life of HTC Butterfly
Battery Life depends on how you use your device. For HTC Butterfly device, if you want to save your battery to last longer hours, you may need to adjust your settings. Follow these suggestions:
• Turn on the power-saving option on the device (if applicable).
• Lessen the screen brightness and the screen lock timeout.
• Turn down your device volume with the volume keys.
• Close any apps or features when you are done using it so they will not continuously running in the background.
• Turn off the network connection if you are out of range so that your device will stop searching for a network signal.
• You should use the latest version of the software update. Software updates improves some features and fixes some bugs on the previous software version.
• Turn off the camera flash.
• The camera viewfinder can be a power drain, so after youve finished taking photos.
How to Make Your HTC Butterfly a Wireless Router
Smartphones these days can now share its mobile data connection and act as a portable Wi-Fi hotspot. And like those high-end gadgets, HTC Butterfly is sure to let you experience the benefits of making it as a portable Wi-Fi hotspot. Heres how you can make your HTC Butterfly phone the next Wi-Fi hotspot.
- Slide the Notifications panel open, and then tap the Gear Icon or Settings.
- Under Wireless & Network, tap More.
- Select Mobile network sharing > Portable Wi-Fi hotspot settings.
- Enter your preferred router name, or you can also use the default name.
- Choose the type of security and set a password for your wireless router. (If you selected none, then you dont have to enter a password.)
- Select the Portable Wi-Fi Hotspot option to turn on the wireless router.
When you see the router wireless icon, then your HTC Butterfly is ready to be used as a router.
Blackberry 9105 keypad repair solution
blackberry 9105 cellular phone keypad repair solution here ,blackberry 9105 cellular phone keypad not working repair solution,blackberry 9105 key not working solution ,blackberry 9105 keypad jumper solution,blackberry 9105 keypad solution guide , blackberry 9105 keypad line not working solution blackberry 9105 many time full hang solution here ,this solution blackberry 9105 any keypad not working jumper way tricks and tips guide here blackberry 9105 many time not working key paid 1st rtry this all board reheat not done try 2nd step my solution see my solution digram and work step by step i hope solved your phone keypad problem many this tested this phone solution see and enjoy this solution.
this solution 100% working solution change this 100% working solution.
Saturday, August 30, 2014
»Chittagong Kings Theme Dj Remix mp3 3 87mb
Download Files:
Chittagong Kings Theme (Dj Remix).mp3 (3.87mb)
Nokia 2220s local mode test mode solution working 100
Nokia 2220s local mode test mode solution charging not supported solution.1.
![Nokia]()
Read More..
Samsung Galaxy S4 ACTIVE shv e470s Android 4 2 2 Jelly Bean Firmware Using How To Rooting Guide
Use this tutorial only with the Samsung Galaxy S4 ACTIVE shv-e470s smartphone.
CAUTION:THIS ROOTING METHOD IS ONLY FOR THE KOREAN VERSION SHV-E470S!!!
It was tested successfully on Samsung Galaxy S4 Active SHV-E470S Android version 4.2.2
Firmware version:E470SKSUANA1
Abstract:
Do not attempt to root any other smartphones with the files that you wil find in this articles.
This tutorial is destined to be used by advanced Android users.
I won’t be blamed in case you brick the phone or lose any data in the process!!!
Rooting the Galaxy S4 ACTIVE SHV-E470S will revoke its warranty. If you want to restore your phones warranty then you will need to flash an official Samsung Android ROM OS.
Pre-requisites :
1. Copy the "UPDATE-SuperSU-v1.93.zip" into your phone internal or external memory
2. Extract the contents of the Odin zip file and place them on your computer’s desktop screen.
3. Power off the Galaxy S4 active shv-e470s now.
4. After that you have to boot the device in Android Download Mode (press and hold: volume down,home and power buttons}
5. Launch Odin on your PC as administrator
6. Connect the phone with your computer via USB cable.(make sure antivirus+firewall is now disabled!!)
7. Wait for ODIN to detect your device,(you should see the "added" message) then continue to the next step.
8. If the phone is not recognized by your PC, then you should re-install the Samsung USB Drivers.
9. Go to ODIN’s main window, click on PDA and then find the "unofficial_philz_touch_6.12.8-e470s.tar" Load it in ODIN.
10. Do not change any other Odin default settings
11. Make sure that the Re-Partition option is not enabled
12. When ready, hit the START button for the process to begin.
13. Don’t press any buttons until the process is complete
14. When ODIN completes the process it will show the PASS alert, then the phone will reboot in normal mode. You can unplug the device from PC when the Samsung Galaxy S4 active shv-e470s boot animation screen loads.
15. Now power off your phone again and boot in recovery mode (press and hold: volume up,home and power buttons)
16. Once in recovery mode,find and install the "UPDATE-SuperSU-v1.93.zip" .To do this,in the recovery menu choose the "install zip" option and then find the directory u have saved the zip file and choose it for installing.
17. Wait for the process to finish and then ur phone will reboot.once reboot u can download "root checker" from play store and verify that u have root access.
18. Have fun and enjoy your rooted SHV-E470S Credit Link.
Read More..
CAUTION:THIS ROOTING METHOD IS ONLY FOR THE KOREAN VERSION SHV-E470S!!!
It was tested successfully on Samsung Galaxy S4 Active SHV-E470S Android version 4.2.2
Firmware version:E470SKSUANA1
Abstract:
Do not attempt to root any other smartphones with the files that you wil find in this articles.
This tutorial is destined to be used by advanced Android users.
I won’t be blamed in case you brick the phone or lose any data in the process!!!
Rooting the Galaxy S4 ACTIVE SHV-E470S will revoke its warranty. If you want to restore your phones warranty then you will need to flash an official Samsung Android ROM OS.
Pre-requisites :
- Download and install the Samsung USB Drivers on your computer
- Disable Samsung KIES program if you have it installed on your computer
- Disable any antivirus applications from running on your computer
- Enable USB Debugging from Developer Options.
- If Developer Options doesn’t appear in Settings, then you need to enable it.
- go to Settings, then More, open About Device.
- tap seven times on the Build Number.
- you will now be enabling Developer Option, go back to main Settings section, scroll down and enable USB Debugging
- Check your phone’s battery and make sure that there is at least 50% left before the device switches off
- Read the entire post, don’t skip any steps and the guide should be completed in under ten minutes with success.
- In case you have trouble completing the guide, then you are free to ask for extra help in comments
- Download required files (see attachments)
1. Copy the "UPDATE-SuperSU-v1.93.zip" into your phone internal or external memory
2. Extract the contents of the Odin zip file and place them on your computer’s desktop screen.
3. Power off the Galaxy S4 active shv-e470s now.
4. After that you have to boot the device in Android Download Mode (press and hold: volume down,home and power buttons}
5. Launch Odin on your PC as administrator
6. Connect the phone with your computer via USB cable.(make sure antivirus+firewall is now disabled!!)
7. Wait for ODIN to detect your device,(you should see the "added" message) then continue to the next step.
8. If the phone is not recognized by your PC, then you should re-install the Samsung USB Drivers.
9. Go to ODIN’s main window, click on PDA and then find the "unofficial_philz_touch_6.12.8-e470s.tar" Load it in ODIN.
10. Do not change any other Odin default settings
11. Make sure that the Re-Partition option is not enabled
12. When ready, hit the START button for the process to begin.
13. Don’t press any buttons until the process is complete
14. When ODIN completes the process it will show the PASS alert, then the phone will reboot in normal mode. You can unplug the device from PC when the Samsung Galaxy S4 active shv-e470s boot animation screen loads.
15. Now power off your phone again and boot in recovery mode (press and hold: volume up,home and power buttons)
16. Once in recovery mode,find and install the "UPDATE-SuperSU-v1.93.zip" .To do this,in the recovery menu choose the "install zip" option and then find the directory u have saved the zip file and choose it for installing.
17. Wait for the process to finish and then ur phone will reboot.once reboot u can download "root checker" from play store and verify that u have root access.
18. Have fun and enjoy your rooted SHV-E470S Credit Link.
Friday, August 29, 2014
How to hard reset acer e130 phone
You can solve other problem using This solution they are
How to factory setting acer 130 phone.
Acer e130 Hard reset problem
Acer e130 reset with hardware key.
- At first Switch off your phone.
- Press and hold volume up + call button and + power button, while still holding before showing android logo then wait some time.After that
- If you see recovery menu / factory menu then go to step 5
- If you dont see recovery menu / factory menu then press home button or left key or call button then you will see.When you see recovery menu / factory menu then go to step 5
- Select Wipe data/Factory and press ok button
- Then select delete all data and press ok button then your phone will be restart and take several minute.
Acer e130 reset with setting menu.
Make sure to backup all your important data before reset.Then reset step by step.
- Open the apps tab then
- Open Settings tab
- Choose sd card and phone storage
- select Factory data reset
- Now tap on reset phone
- Finally tap on Erase everything.
BlackBerry Q10 Tips and Tricks
How to Lock your BlackBerry Q10 With a Password
A simple way to secure your BlackBerry to prevent unauthorized person to access your phone is to set a password.
Read More..
A simple way to secure your BlackBerry to prevent unauthorized person to access your phone is to set a password.
1. If you dont have a password yet, on the home screen, swipe down from the top of the screen to access the option.
2. Tap 
Settings > Security and Privacy > Device Password.
Settings > Security and Privacy > Device Password. 3. Switch On the Device Password and enter your preferred password.
Press and hold the Power/Lock key on the top of your device. Tap
.
If you want to lock your screen with a certain amount of time, do this:
If you want to automatically lock your device when its in a BlackBerry case, do this:
To lock your device, do this:
Press and hold the Power/Lock key on the top of your device. Tap
.If you want to lock your screen with a certain amount of time, do this:
- On the home screen, swipe down from the top of the screen.
- Tap
If you want to automatically lock your device when its in a BlackBerry case, do this:
- On the home screen, swipe down from the top of the screen.
- Tap
After you set-up or finish the settings, to unlock your device, press the Power/Lock key on the top of your device. Swipe up from the bottom of the screen. When prompted, enter your device password.
How to Extend Battery Life on Blackberry Q10
Battery Life depends on how you use your device. For Blackberry Q10 device, if you want to save your battery to last longer hours, you may need to adjust your settings. Follow these suggestions:
• Turn on the power-saving option on the device. Then lessen the screen brightness and the screen lock timeout. On the Home Screen, swipe down from the top of the screen. Tap on the Gear Icon or Settings > Display.
• Turn down your device volume with the volume keys. You can also adjust the volume on Settings > System Volume or Notifications.
• Close any apps or features when you are done using it so they will not continuously running in the background.
• Turn off the network connection if you are out of range so that your device will stop searching for a network signal. To turn off the network go to Settings > Network Connections.
• You should use the latest version of the software update. Software updates improves some features and fixes some bugs on the previous software version.
• Save data to a media card instead of your device storage.
• Turn off the camera flash.
1. To set up your voice mail, open your Phone app and swiped down from the top of the screen.
2. Then tap on Settings option.
3. On the list, tap on Voice Mail and type your voice mail access number and password. Now your friends can leave a voice mail whenever you can’t pick up your phone.
4. Now to set up speed dial, go to your list of contacts
5. Touch and hold a phone number or contact for few seconds. Select Add to Speed Dial. You’ve just added a contact to your speed dial list.
Change your voice mail password
Depending on your wireless service provider, this feature might not be supported.
How to Start a Conference Call on Blackberry Q10
Blackberry is said to be the perfect phone for all those in the business world. Its new installment of smartphone, the Q10, even makes it easy to do a conference call. So just imagine discussing your business over the phone with your associates with just a few tap on its touchscreen. Here’s how you can start a conference call.
To answer a second call while already on a call:
1. Now if you answer a second call while you’re already on a call, tap Answer and you’re first call will be automatically put on hold.
2. To merge both calls and start a conference call, tap
.
3. Just repeat steps 1 and 2 to add more people to the conference.
To make another call while you’re already on a call:
1. Tap on Add Call while you’re on a call. Take note that while you make another call, your first call is automatically put on hold.
2. Now you can dial a number by tapping
; call a contact by tapping
; tap a phone number, name or speed dial contact.
3. And merge both calls by tapping to start a conference call.
4. Repeat steps 1-3 to add more people to the conference call.
To remove people from the conference call:
1. View the conference call participants by tapping
.
2. Remove a person from the call by doing one of the following:
• To remove a person from the conference call and hang up, tap
• To remove a person from the conference and keep them in a separate call, tap
How to Answer Calls Automatically on BlackBerry Q10
This feature of BlackBerry Q10 will let you answer call automatically when you have a headset connected or when you remove your device from a case or holster. This will be very helpful and less hassle — especially when you expect a lot of coming calls.
How to set your Blackberry Q10 to answer automatically or end a call using a case or holster:
1. Swipe down from the top of the screen in the Phone app.
2. Tap on Settings or the Gear Icon, then select Holster.
3. Do any of the following:
• Set the Answer a Call by Removing Device From Holster switch to On.
• Set the End Call by Putting Device Back in Holster switch to On.
This steps will let you automatically answer a call when a headset is connected:
1. Swipe down from the top of the screen in the Phone app.
2. Tap on Settings or the Gear Icon, then select Bluetooth.
3. Set the Automatically Answer a Call When Connected to a Headset switch to On.
Your calls will automatically be answered after 5 seconds when you turn on this feature and you have a headset connected to your BlackBerry Q10.
How to Print on BlackBerry Q10 Using the Print To Go Software
Now you can easily print on your BlackBerry Q10 using the Print To Go software. This feature will surely minimize your work since you dont have to transfer the file from your BlackBerry Q10 to your computer then print it. Save your time and less hassle with the Print To Go.
First, you need to download the Print To Go software.
1. On your computer go to this page this www.blackberry.com/PrintToGo.
2. Just follow the given instructions on the screen to complete the installation on your computer.
Once the installation process is complete, you can now print a file from your BlackBerry Q10. But you need to configure first your printer. Follow these steps:
1. On your computer, try to print an item/file and choose Print To Go as the printer.
2. You need to enter your BlackBerry ID and your password, then click Sign In.
3. If applicable, enter your pairing password, device PIN, and your device name, then click Next.
4. If you want to print multiple devices, click Add Another Device. Just make sure that it is associated with your BlackBerry ID.
5. Click Done.
6. Click on Remember Me if you want to save the settings you just entered.
7. Finally, click Print.
When printing is complete, open Print To Go on your BlackBerry device, then find your pairing password. Your pairing password helps to establish a more secure connection between your computer and your BlackBerry device.
1. Swipe down from the top of the screen.
2. Tap Settings or the Gear Icon.
To reset your pairing password, tap Reset.
If you want to delete a folder or printout from Print To Go:
1. Tap and hold a printout or folder in a few seconds.
2. Then tap the Trash Bin icon.
How to Share Your Internet Connection Using Mobile Hotspot Mode
By using the Mobile Hotspot Mode you can create a Wi-Fi network that other devices can connect with. They can surf through the Internet using the mobile network connection on your BlackBerry Q10. You can connect to the Internet anywhere as long as there is a mobile network connection. Connecting the mobile hotspot is more likely the same as connecting to any regular router.
Now, set up your mobile hotspot mode on your BlackBerry device:
Make sure that your BlackBerry devices connection to the mobile network is turned on.
1. On the home screen, swipe down from the top of the screen.
2. Tap Settings or Gear Icon, then Network Connection > Mobile Hotspot.
3. If this is your first time to set the Mobile Hotspot mode, just complete the instructions on the screen.
Note: Read the instructions carefully and remember your Mobile Hotspot password.
4. Then set the Mobile Hotspot switch to On.
5. You need to know the name of the mobile hotspot and the password you set during the setup process. If your friends want to connect to the mobile hotspot, it is same as connecting to a Wi-Fi network. Find the network then connect.
How to Change Facebook Notifications on BlackBerry Q10
Facebook is the most popular social networking site, and almost all of the devices nowadays have its own Facebook mobile app. In BackBerry Q10, once you sign in to the Facebook app, you will begin to receive notification on your Facebook account. It will automatically appear in the BlackBerry Hub.
If you dont want to receive these notifications on your BlackBerry Q10, you just need to change your settings:
1. On the Home Screen, swipe down from the top of the screen.
2. Tap on Settings or Gear Icon.
3. Select Accounts, then Facebook.
4. If you dont want to receive notifications, set the Enable Notifications to Off.
If you dont want to receive your Facebook messages, set the Sync Messages to Off.
Set the Sync Events to Off, to stop adding Facebook events to the Calendar app.
To change Facebook friends birthdays, tap the Birthday Reminder drop-down list.
5. Then tap Save to apply the changes.
Battery Life depends on how you use your device. For Blackberry Q10 device, if you want to save your battery to last longer hours, you may need to adjust your settings. Follow these suggestions:
• Turn on the power-saving option on the device. Then lessen the screen brightness and the screen lock timeout. On the Home Screen, swipe down from the top of the screen. Tap on the Gear Icon or Settings > Display.
• Turn down your device volume with the volume keys. You can also adjust the volume on Settings > System Volume or Notifications.
• Close any apps or features when you are done using it so they will not continuously running in the background.
• Turn off the network connection if you are out of range so that your device will stop searching for a network signal. To turn off the network go to Settings > Network Connections.
• You should use the latest version of the software update. Software updates improves some features and fixes some bugs on the previous software version.
• Save data to a media card instead of your device storage.
• Turn off the camera flash.
How to Set Up Voice Mail and Speed Dial on Blackberry Q10
Blackberry Q10 somehow received pretty good reviews on its specs and features. To get familiar with it, we had few steps below on how to set up voice mail and speed dial for Blackberry Q10.1. To set up your voice mail, open your Phone app and swiped down from the top of the screen.
2. Then tap on Settings option.
3. On the list, tap on Voice Mail and type your voice mail access number and password. Now your friends can leave a voice mail whenever you can’t pick up your phone.
4. Now to set up speed dial, go to your list of contacts
5. Touch and hold a phone number or contact for few seconds. Select Add to Speed Dial. You’ve just added a contact to your speed dial list.
Change your voice mail password
Depending on your wireless service provider, this feature might not be supported.
- In the Phone app, swipe down from the top of the screen > tap
.
- Tap Change Password.
How to Start a Conference Call on Blackberry Q10
Blackberry is said to be the perfect phone for all those in the business world. Its new installment of smartphone, the Q10, even makes it easy to do a conference call. So just imagine discussing your business over the phone with your associates with just a few tap on its touchscreen. Here’s how you can start a conference call.
To answer a second call while already on a call:
1. Now if you answer a second call while you’re already on a call, tap Answer and you’re first call will be automatically put on hold.
2. To merge both calls and start a conference call, tap
.3. Just repeat steps 1 and 2 to add more people to the conference.
To make another call while you’re already on a call:
1. Tap on Add Call while you’re on a call. Take note that while you make another call, your first call is automatically put on hold.
2. Now you can dial a number by tapping
; call a contact by tapping ; tap a phone number, name or speed dial contact.3. And merge both calls by tapping
to start a conference call.4. Repeat steps 1-3 to add more people to the conference call.
To remove people from the conference call:
1. View the conference call participants by tapping
.2. Remove a person from the call by doing one of the following:
• To remove a person from the conference call and hang up, tap
• To remove a person from the conference and keep them in a separate call, tap
How to Answer Calls Automatically on BlackBerry Q10
This feature of BlackBerry Q10 will let you answer call automatically when you have a headset connected or when you remove your device from a case or holster. This will be very helpful and less hassle — especially when you expect a lot of coming calls.
How to set your Blackberry Q10 to answer automatically or end a call using a case or holster:
1. Swipe down from the top of the screen in the Phone app.
2. Tap on Settings or the Gear Icon, then select Holster.
3. Do any of the following:
• Set the Answer a Call by Removing Device From Holster switch to On.
• Set the End Call by Putting Device Back in Holster switch to On.
This steps will let you automatically answer a call when a headset is connected:
1. Swipe down from the top of the screen in the Phone app.
2. Tap on Settings or the Gear Icon, then select Bluetooth.
3. Set the Automatically Answer a Call When Connected to a Headset switch to On.
Your calls will automatically be answered after 5 seconds when you turn on this feature and you have a headset connected to your BlackBerry Q10.
How to Print on BlackBerry Q10 Using the Print To Go Software
Now you can easily print on your BlackBerry Q10 using the Print To Go software. This feature will surely minimize your work since you dont have to transfer the file from your BlackBerry Q10 to your computer then print it. Save your time and less hassle with the Print To Go.
First, you need to download the Print To Go software.
1. On your computer go to this page this www.blackberry.com/PrintToGo.
2. Just follow the given instructions on the screen to complete the installation on your computer.
Once the installation process is complete, you can now print a file from your BlackBerry Q10. But you need to configure first your printer. Follow these steps:
1. On your computer, try to print an item/file and choose Print To Go as the printer.
2. You need to enter your BlackBerry ID and your password, then click Sign In.
3. If applicable, enter your pairing password, device PIN, and your device name, then click Next.
4. If you want to print multiple devices, click Add Another Device. Just make sure that it is associated with your BlackBerry ID.
5. Click Done.
6. Click on Remember Me if you want to save the settings you just entered.
7. Finally, click Print.
When printing is complete, open Print To Go on your BlackBerry device, then find your pairing password. Your pairing password helps to establish a more secure connection between your computer and your BlackBerry device.
1. Swipe down from the top of the screen.
2. Tap Settings or the Gear Icon.
To reset your pairing password, tap Reset.
If you want to delete a folder or printout from Print To Go:
1. Tap and hold a printout or folder in a few seconds.
2. Then tap the Trash Bin icon.
How to Share Your Internet Connection Using Mobile Hotspot Mode
By using the Mobile Hotspot Mode you can create a Wi-Fi network that other devices can connect with. They can surf through the Internet using the mobile network connection on your BlackBerry Q10. You can connect to the Internet anywhere as long as there is a mobile network connection. Connecting the mobile hotspot is more likely the same as connecting to any regular router.
Now, set up your mobile hotspot mode on your BlackBerry device:
Make sure that your BlackBerry devices connection to the mobile network is turned on.
1. On the home screen, swipe down from the top of the screen.
2. Tap Settings or Gear Icon, then Network Connection > Mobile Hotspot.
3. If this is your first time to set the Mobile Hotspot mode, just complete the instructions on the screen.
Note: Read the instructions carefully and remember your Mobile Hotspot password.
4. Then set the Mobile Hotspot switch to On.
5. You need to know the name of the mobile hotspot and the password you set during the setup process. If your friends want to connect to the mobile hotspot, it is same as connecting to a Wi-Fi network. Find the network then connect.
How to Change Facebook Notifications on BlackBerry Q10
Facebook is the most popular social networking site, and almost all of the devices nowadays have its own Facebook mobile app. In BackBerry Q10, once you sign in to the Facebook app, you will begin to receive notification on your Facebook account. It will automatically appear in the BlackBerry Hub.
If you dont want to receive these notifications on your BlackBerry Q10, you just need to change your settings:
1. On the Home Screen, swipe down from the top of the screen.
2. Tap on Settings or Gear Icon.
3. Select Accounts, then Facebook.
4. If you dont want to receive notifications, set the Enable Notifications to Off.
If you dont want to receive your Facebook messages, set the Sync Messages to Off.
Set the Sync Events to Off, to stop adding Facebook events to the Calendar app.
To change Facebook friends birthdays, tap the Birthday Reminder drop-down list.
5. Then tap Save to apply the changes.
How to Add, Change, or Delete a Password in Password Keeper on BlackBerry Q10
Password Keeper is an application in BlackBerry where you can saved all your passwords. This can also be used in generating a random passwords that contain numbers, letters, and symbols. This application is designed to encrypt your passwords to protect them. The Password Keeper also decrypts your passwords so you can see them when you type your password.
There will come a time that you want to change or delete the password that you made in Password Keeper on BlackBerry Q10. In this article you will know how to add, change or edit, and delete a password in the Password Keeper.
To add a new password, follow the steps below:
Step 1. In the Password Keeper application, tap the "Plus" sign.
Step 2. Type the title, website, and password information.
Step 3. Then tap the "Check" sign.
To change or edit a password in the Password Keeper application, follow the steps below:
Step 1. Select a password that you want to change.
Step 2. Tap the "Pencil" icon.
Step 3. Then type the new password information.
Step 4. Tap the "Check" sign to confirm the changes.
To delete a password in the Password Keeper application, complete the following step:
Step 1. Select a password.
Step 2. Tap "Three Vertical Line" icon, then tap "Trash Bin" icon.
You can also multi-select the passwords to delete.
Password Keeper is an application in BlackBerry where you can saved all your passwords. This can also be used in generating a random passwords that contain numbers, letters, and symbols. This application is designed to encrypt your passwords to protect them. The Password Keeper also decrypts your passwords so you can see them when you type your password.
There will come a time that you want to change or delete the password that you made in Password Keeper on BlackBerry Q10. In this article you will know how to add, change or edit, and delete a password in the Password Keeper.
To add a new password, follow the steps below:
Step 1. In the Password Keeper application, tap the "Plus" sign.
Step 2. Type the title, website, and password information.
Step 3. Then tap the "Check" sign.
To change or edit a password in the Password Keeper application, follow the steps below:
Step 1. Select a password that you want to change.
Step 2. Tap the "Pencil" icon.
Step 3. Then type the new password information.
Step 4. Tap the "Check" sign to confirm the changes.
To delete a password in the Password Keeper application, complete the following step:
Step 1. Select a password.
Step 2. Tap "Three Vertical Line" icon, then tap "Trash Bin" icon.
You can also multi-select the passwords to delete.
How to Send a File Using NFC on BlackBerry Z10
In case you dont know what is NFC (Near Field Communication), it is a short-range wireless technology that is designed for transferring files or data quickly on each devices. BlackBerry Q10 also has this kind of feature, were you can exchange many kinds of files, including music, pictures and etc. This is between your Blackberry device and other NFC enabled devices.
How to send a file using NFC:
1. Find and highlight or open a file that you want to send.
If you want to send multiple files, then find and highlight all the files.
2. Then tap the V icon
.
3. Select NFC.
4. Now, align the back of your BlackBerry Q10 device with an NFC-enabled device.
5. If necessary, tap Send.
How to Factory Reset BlackBerry Q10
Restoring the default settings or factory reset your device will delete all your existing files. So, it is recommended to backup your important files on your computer before attempting to reset your device. Unfortunately, the hard reset function is not available on this phone.
To perform a master reset, follow these steps:
1. Back up all data on the internal memory.
2. From any Home screen, touch the Status bar and drag it down.
3. Tap Settings.
4. Tap Security and privacy.
5. Tap Security wipe.
Note: You must decrypt you media card before the security wipe. Otherwise, the card will become inaccessible.
6. Swipe up on the screen and enter blackberry into the text field and tap Delete Data.
7. Follow any additional prompts.
In case you dont know what is NFC (Near Field Communication), it is a short-range wireless technology that is designed for transferring files or data quickly on each devices. BlackBerry Q10 also has this kind of feature, were you can exchange many kinds of files, including music, pictures and etc. This is between your Blackberry device and other NFC enabled devices.
How to send a file using NFC:
1. Find and highlight or open a file that you want to send.
If you want to send multiple files, then find and highlight all the files.
2. Then tap the V icon
.4. Now, align the back of your BlackBerry Q10 device with an NFC-enabled device.
5. If necessary, tap Send.
How to Factory Reset BlackBerry Q10
Restoring the default settings or factory reset your device will delete all your existing files. So, it is recommended to backup your important files on your computer before attempting to reset your device. Unfortunately, the hard reset function is not available on this phone.
To perform a master reset, follow these steps:
1. Back up all data on the internal memory.
2. From any Home screen, touch the Status bar and drag it down.
3. Tap Settings.
4. Tap Security and privacy.
5. Tap Security wipe.
Note: You must decrypt you media card before the security wipe. Otherwise, the card will become inaccessible.
6. Swipe up on the screen and enter blackberry into the text field and tap Delete Data.
7. Follow any additional prompts.
Samsung i5800 Mic Not Working Solution
How To Easy Root and Unroot Motorola Droid X Easiest Method
How To Root or Unroot Motorola Droid X
- Charge your device upto 70% level.
- Make a backup of data for safety.
- Enable USB Debugging in your device.Click Here if you dont know how to enable.
Download Required Files:
How To Root Motorola Droid X:
- Download Framaroot.apk app in you device.
- Install Framaroot.apk app in your device.(If you see an error, Go to Setting>Applications and enable Unknown Sources their and then try to install again).
- Launch framaroot app in your device.
- Now you will see some exploits in app.
- Select GANDALF Exploit from them.
- Application will automatically start rooting your device.
- It will take only few seconds and then restart your device.
- Your Motorola Droid X is successfully rooted now...
How To Unroot Motorola Droid X: - Download Framaroot.apk app in you device.
- Install Framaroot.apk app in your device.(If you see an error, Go to Setting>Applications and enable Unknown Sources their and then try to install again).
- Launch framaroot app in your device.
- Select Unroot from option.
- Then select GANDALF Exploit from the list of exploits.
- The Application will automatically Unroot your device.
- It take few seconds only then restart your device.
- Motorola Droid X is unrooted now...
Thanks for visiting....Dont forgot to share & follow us on Social media..
Thursday, August 28, 2014
Wednesday, August 27, 2014
Samsung Galaxy Note 10 1 N8000 Using Android 4 4 2 KitKat Firmware and Install CWM Recovery With How to Root Guide
Samsung Galaxy Note 10.1 (GT-N8000) users who wish to root and install ClockworkMod Recovery (CWM) on their devices, may follow our step-by-step guide below.
This tutorial uses PhilZ Touch recovery was developed and released by Recognized XDA-Developers, Phil3759. PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM. Head over to the PhilZ Touch main thread to learn more about the features.
Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-Requisites
1. Install USB Drivers for Samsung Galaxy Note 10.1 on your computer.
2. Enable USB Debugging Mode on the note by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the note is charged more than 80 percent.
5. The CWM recovery works only on the Galaxy Note 10.1 (GT-N8000). Applying these on any incorrect variant might brick the device. Verify the model number of the Galaxy Note 10.1 by selecting Settings >> About Phone.
Files Required
1. CWM (Mirror Link) (philz_touch_6.41.6-n8000.tar.md5)
2. SuperSU (UPDATE-SuperSU-v1.91.zip) or the latest version
3. Odin 3.09
Steps to Install CWM Recovery on Galaxy Note 10.1 N8000
Step 1: Extract the Odin 3.09 .zip files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Copy the SuperSU .zip file to the SD card of your device.
Step 3: Switch off the Galaxy Note 10.1. Then boot into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy Note 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 6: In Odin, click the AP button and select the philz_touch_6.41.6-n8000.tar.md5 file. Make sure that the Re-Partition checkbox is NOT ticked.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, your note will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.
Steps to Root Galaxy Note 10.1 N8000 via CWM Recovery
Step 9: Boot the Galaxy Note 10.1 into CWM Recovery by pressing and holding Volume Up and Power buttons together.
Step 10: In CWM Recovery, select "Install zip from sdcard" option then navigate to the SuperSU .zip file that you copied earlier and confirm the installation.
Step 11: Once the installation process completes, return to main recovery menu and select "Reboot System Now".
Samsung Galaxy Note 10.1 N8000 running on Android 4.4.2 KitKat is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.
Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.
Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.
Read More..
This tutorial uses PhilZ Touch recovery was developed and released by Recognized XDA-Developers, Phil3759. PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM. Head over to the PhilZ Touch main thread to learn more about the features.
Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-Requisites
1. Install USB Drivers for Samsung Galaxy Note 10.1 on your computer.
2. Enable USB Debugging Mode on the note by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the note is charged more than 80 percent.
5. The CWM recovery works only on the Galaxy Note 10.1 (GT-N8000). Applying these on any incorrect variant might brick the device. Verify the model number of the Galaxy Note 10.1 by selecting Settings >> About Phone.
Files Required
1. CWM (Mirror Link) (philz_touch_6.41.6-n8000.tar.md5)
2. SuperSU (UPDATE-SuperSU-v1.91.zip) or the latest version
3. Odin 3.09
Steps to Install CWM Recovery on Galaxy Note 10.1 N8000
Step 1: Extract the Odin 3.09 .zip files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Copy the SuperSU .zip file to the SD card of your device.
Step 3: Switch off the Galaxy Note 10.1. Then boot into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy Note 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 6: In Odin, click the AP button and select the philz_touch_6.41.6-n8000.tar.md5 file. Make sure that the Re-Partition checkbox is NOT ticked.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, your note will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.
Steps to Root Galaxy Note 10.1 N8000 via CWM Recovery
Step 9: Boot the Galaxy Note 10.1 into CWM Recovery by pressing and holding Volume Up and Power buttons together.
Step 10: In CWM Recovery, select "Install zip from sdcard" option then navigate to the SuperSU .zip file that you copied earlier and confirm the installation.
Step 11: Once the installation process completes, return to main recovery menu and select "Reboot System Now".
Samsung Galaxy Note 10.1 N8000 running on Android 4.4.2 KitKat is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.
Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.
Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.
Latest Nokia C5 00 vibrate only Tested Solution 100
Latest Nokia C5 00 vibrate only Tested Solution 100
Nokia 1680c Local Test mode
Nokia1680c local Test Mode Solution ....,
if you check it much give few comments about this so that others can learn form your comments also.
If you have any other Questions please do not hesitate to share with me.
If you have any other Questions please do not hesitate to share with me.
Samsung i5800 Ringer Ways fix problem
Tuesday, August 26, 2014
How To Root UBALK2 Android 4 1 1 Firmware On Galaxy Camera GC100
How to Root UBALK2 Android 4.1.1 Firmware on Galaxy Camera GC100 - If you have updated your Galaxy Camera GC100 to UBALK2 Android 4.1.1 firmware and now want to root it, then follow the guide after the jump.
- You have installed your Camera EK-GC100 USB drivers on your PC.
- You need to enable USB debugging mode which is deactivated by default.
- You camera should have 70-80% charge remaining.
- Backup your important data like Call logs, SMS and other data in stored in phone memory so in case if anything goes wrong, your data is not hurt.
- The update is only meant for Camera EK-GC100, so don’t other to try it on other variants.
- Your Galaxy Camera EK-GC100 should be updated to UBALK2 Android 4.1.1 firmware.
How to Root UBALK2 Android 4.1.1 Firmware on Galaxy Camera GC100???
Step 1) Download CF-Auto Root for Camera EK-GC100.
Step 2) Download ODIN v3.07.
Step 3) Turn OFF your camera.
Step 4) Now you will need to turn it ON in download mode.
Guide: How to Put Samsung Galaxy Camera in Download Mode
Step 5) Now open ODIN on your PC and connect your Camera EK-GC100 to your computer.
Step 5) Once your camera is successfully connected to your PC, the ID:COM box on ODIN will turn yellow and will show the COM port number.
Step 6) Select the downloaded file to install by following below steps:
Click on PDA and select CF-Auto-Root-gd1-gd1xx-ekgc100.tar.md5 file.
Step 7) Again to to ODIN window and check Auto Reboot and F. Reset Time options.
Step 8) Click on Start button in ODIN window to start the installation process. The process will take few minutes to complete.
Step 9) When the installation is completed, your phone will restart.
You are done!
Monday, August 25, 2014
Volcano Box 2 4 1 SPD 6531 FORMAT MTK 6572 IMEI Repair
Whats new ?
Volcano v2.4.1
Adjust SPD 6531 Format
Adjust MTK6572 Read infor(solve 6572+NAND cant read partition)
Added Coolsand BootB Read password
SPD Android added new flash support
Android smart phone MTK6572 added Imei Change(under Andriod imei and choose new Algo.)
Download HotFile
Downlaod MediaFire
Blackberry 9000 cellular mobile repair usb ways solution
blackberry 9000 usb Line Ways How to Fix problem , blackberry usd not connected solution many time line ok but not working usd cable this solution try blackberry usd line not working solution , blackberry 8800 usd print damage solution blackberry usd ic ok but not working, solution blackberry 9000 usb not detected solution ,blackberry 9000 usb not working any idia have this idia try my solution 100% tested solution here see this solution only change this ic 100% solve your phone usb not recognize,100% tested solution here many time tested this solution
blackberry 9000 usd not charge phone solution ,blackberry 9000 changing solution blackberry charging jumper ways repair solution ,blackberry 9000 charger connect but no charging solution
Sunday, August 24, 2014
TOP GSM Tool 2009 by smail002
Supported Models:
Mx key Emulator
Virtual p key v2
Cc Emulator
care beta- sx4
Siemens
Freia v18 free
Joker 0.3.5.6c unofficial
Sony ericsson
setool2lite v1.11 usb and ufs
smecTool UFS
USB Smart v8.4
BB5 plus 2.01 free
zulea v1.03 damager fix 1.03
bb5 unlock er 1.01
cable compatibility
and More
Download
http://hotfile.com/dl/40402556/6933177/TOP_GSM_Tool_2009_by_smail002.rar.html
Nokia Lumia 520 RM 914 Firmware V 3046 0000 1329 2009 Free Download
Windows Phone Nokia Lumia 520 (RM-914) Firmware V 3046.0000.1329.2009 Free Download
Download Windows Phone 8 Nokia Lumia 520 Flashing File Direct with Auto Ini
File Description:
Phone Name: Lumia 520 Product
Type: RM-914
Firmware Version: 3046.0000.1329.2009
Varian Name: RM-914 VAR APAC NZ VODAFONE
Product Code: 059S373
File Download Link:
How to Update Samsung Galaxy Fame S6810L with Android 4 1 2 UBANA1 Jelly Bean Official Firmware Using Odin Guide
Firmware details
PDA: S6810LUBANA1
CSC: S6810LPSPANA2
MODEM: S6810LUBAML1
Version: Android 4.1.2
Build date: Jan 02, 2014
Regions: Argentina
Samsung Galaxy Fame S6810L users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Fame on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Fame should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.1.2 UBANA1 Jelly Bean firmware is compatible only with Samsung Galaxy Fame (GT-S6810L). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Fame by navigating to Settings >> About Phone.
Files Required
1. Android 4.1.2 UBANA1 Jelly Bean Firmware for Galaxy Fame S6810L
2. Odin 3.07
Related Article:How to Update Galaxy Fame S6810 with Android 4.1.2 XXAMJ1 Jelly Bean Official Firmware Steps to Update Galaxy Fame S6810L with Android 4.1.2 UBANA1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Fame.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Fame to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 7: Select the following files in Odin from extracted S6810LUBANA1 firmware folder:
- Click the PDA button and select the .tar.md5 file.
- Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
- Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
- Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.
Samsung Galaxy Fame S6810L should be now updated with Android 4.1.2 UBANA1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy Fame S6810L stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.
Click here to know How to Root Galaxy Fame S6810 running on Android 4.1.2 Jelly Bean firmware.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.
Samsung Galaxy Fame S6810L should be now updated with Android 4.1.2 UBANA1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy Fame S6810L stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.
Click here to know How to Root Galaxy Fame S6810 running on Android 4.1.2 Jelly Bean firmware.
Samsung i5800 Camera Not Working fix problem
Saturday, August 23, 2014
Nokia 1661 fake charging
May be many problems of your phone.But maximum problems are repairable, so no tension.Today I shown how to repair nokia 1661 fake charge.This solution tested many time.
How to do this work :If your phone is charging ok but charge not save.then rehot this parts or replace.If you this work your problems will be solved.
c3303 no speaker no mic 100
c3303 no speaker no mic work remove resistor & make jumper like this image.
Image view large Here:Heardsolution.blogspot.com
Image view large Here:Heardsolution.blogspot.com
Blackberry 8800 usb Line Ways Solution
blackberry 8800 usb Line Ways Solution , blackberry usd not connected solution many time line ok but not working usd cable this solution try blackberry usd line not working solution , blackberry 8800 usd print damage solution blackberry usd ic ok but not working, solution blackberry 8800 usb not detected solution ,blackberry 8800 usb not working any idia have this idia try my solution 100% tested solution here see this solution
blackberry 8800 usb Line Ways Solution , blackberry usd not connected solution many time line ok but not working usd cable this solution try blackberry usd line not working solution , blackberry 8800 usd print damage solution blackberry usd ic ok but not working, solution blackberry 8800 usb not detected solution ,blackberry 8800 usb not working any idia have this idia try my solution 100% tested solution here see this solution
Friday, August 22, 2014
Factory Data Reset Samsung Galaxy S Plus I9001 to Restore OriginalValues
Factory Data Reset Samsung Galaxy S Plus I9001 to Restore Original Values - The Samsung Galaxy S and I9001 is AN increased version of the favored Galaxy S, with a quicker processor (1.4 rate Scorpion CPU), a more consistent and powerful battery and therefore the latest version of android OS, "Gingerbread" v2.3. Samsung Galaxy S and I9001 contains a distinctive bit screen 4-inch "Super AMOLED," providing a brightness and a distinction quantitative relation of exception, 720p HD video, Wi-Fi, AN A-GPS and Bluetooth 3. On the rear aspect, you’ll realize 5 MP camera with optical device, Geo-tagging, bit focus, face and smile detection, and video capability (720p@30fps). Front facing VGA camera conjointly out there for video line. The Samsung Galaxy S and is set its name.
Factory Data Reset Samsung Galaxy S Plus I9001 to Restore Original Values
How to Reset Samsung Galaxy S Plus I9001?
Hard Reset Samsung Galaxy S Plus I9001
Hard Reset Samsung Galaxy S Plus I9001
If your device freezes or hangs, you may need to close programs or reset the device to regain functionality. If your device is frozen and unresponsive, press and hold for 8-10 seconds. The device will reboot automatically. If this does not solve the problem, perform a factory data reset.
To factory data reset your Samsung Galaxy S Plus I9001 do the following steps:
In Idle mode, open the application list and select Settings → Privacy → Factory data reset → Reset phone → Erase everything.
Caution: Be sure to back up important data. Samsung is not responsible for data loss.
Huawei USB Modem Unlocker 1
Huawei USB Modem Unlocker-1 Download,
if you check it much give few comments about this so that others can learn form your comments also.
If you have any other Questions please do not hesitate to share with me.
If you have any other Questions please do not hesitate to share with me.
Nokia C2 01 RM 721Version 11 50 latest Firmware flash files Free Download
Nokia C2-01 (RM-721) latest Firmware flash file free download Software version: 11.50
Nokia C2-01 (RM-721_11.50) latest Firmware flash files Free direct download only 3 files mcu,ppm,cnt just click on file for direct download
Thursday, August 21, 2014
Sony Ericsson X10i Charging Ways fix problem
Use original usb cable and charger for this model only.
Phone might not work when using not original charger.
Chk Our Previous Post :IPhone5 All How to Fix problem
Sony Ericsson X10i Charging ways Jumper How to Fix problem,Sony Ericsson X10i Charging line How to Fix problem,Sony Ericsson X10i Charging ways damage How to Fix problem,Sony Ericsson X10i Charging How to Fix problem ways repair,Sony Ericsson X10i Charging ic ways line jumper How to Fix problem
Sony Ericsson X10i Charging ways Jumper How to Fix problem,Sony Ericsson X10i Charging line How to Fix problem,Sony Ericsson X10i Charging ways damage How to Fix problem,Sony Ericsson X10i Charging How to Fix problem ways repair,Sony Ericsson X10i Charging ic ways line jumper How to Fix problem
Phone might not work when using not original charger.
Chk Our Previous Post :IPhone5 All How to Fix problem
Sony Ericsson X10i Charging ways Jumper How to Fix problem,Sony Ericsson X10i Charging line How to Fix problem,Sony Ericsson X10i Charging ways damage How to Fix problem,Sony Ericsson X10i Charging How to Fix problem ways repair,Sony Ericsson X10i Charging ic ways line jumper How to Fix problem
Sony Ericsson X10i Charging ways Jumper How to Fix problem,Sony Ericsson X10i Charging line How to Fix problem,Sony Ericsson X10i Charging ways damage How to Fix problem,Sony Ericsson X10i Charging How to Fix problem ways repair,Sony Ericsson X10i Charging ic ways line jumper How to Fix problem
Nokia 5230 Bluetooth Not Active Problem Solution 100 Tested
Nokia 5230 Bluetooth solution.Bluetooth On hnag is Set Solution,Bluetoothon then set restart problem Solution.
Read More..
GPG Dragon V3 35 Auto Get Mobile CPU Chip Type Add
Dragon V3.35 Auto Get Mobile CPU Chip Type
Without Install the Driver before,Software auto Get the CPU
(this time for USB pinfind only)
Support MTKSPDMstarCoolsand All CPU
if you dont know what cpu inside the Mobile,then you can select MTK ;Mobile option select to USB;click start,after pinfind,software will tell you this is what CPU
this need stuep the driver before or not?not need;even you no have install the driver before,software also can get this
Some pics about this news:
Read More..
Without Install the Driver before,Software auto Get the CPU
(this time for USB pinfind only)
Support MTKSPDMstarCoolsand All CPU
if you dont know what cpu inside the Mobile,then you can select MTK ;Mobile option select to USB;click start,after pinfind,software will tell you this is what CPU
this need stuep the driver before or not?not need;even you no have install the driver before,software also can get this
Some pics about this news:
Subscribe to:
Posts (Atom)