One of All Gsm Solution

As the official Jelly Bean update has been released for the Samsung Galaxy S3 from a while, now all the users who applied the stock firmware on their devices are looking for a root procedure that can be performed on the new OS. In order to help you out, today we will be checking in how to easily gain root access for the Galaxy S3 GT I9305 that runs on the official Android 4.1.2 XXBMA3 software. Take note though that this tutorial is being suitable only for the S3 model number I9305 that is being powered by the mentioned ROM, so don’t try to complete the steps from bellow for a similar device.
It is important to have a rooted handset because who knows when you will need access to its internal system. On a rooted OS you can install complex apps that requires root access in order to work properly (such as CWM recovery and some backup and restore tools), you can remove in-built programs in order to improve the speeds, optimize and customize the system and so on. The best part is that once the root access is granted you can start updating your Galaxy S3 with the latest custom ROMs, which are being perfect for those who want to try something different than the classic or default Jelly Bean experience.
In a few words, if you want to properly use your smartphone, gaining root access is a must have. Actually, this will be the first step to make if you want to power up the Galaxy S3 performances, so why not to try the same? The root procedure can be easily performed, the present step by step guide being all that you need. You have all the aspects needed explained and detailed below, so let’s get started. Anyway, do read all the following lines or else you can end up in bricking your phone, and I know that you don’t want that to happen.Above, we have seen which the advantages that come with a root operation are. Well, now let’s see if there are negative aspects too. As usual, when we are talking about unofficial procedures, there are some things that must be revealed. Related to our purpose, the most relevant one is referring to your Samsung Galaxy S3 I9305 warranty. By trying to root your Galaxy S3 that runs the Jelly Bean 4.1.2 XXBMA3 firmware you will make changes into the internal system of your device. This means that the warranty will be void. This aspect can’t be avoided, so if you are not sure that you can safely complete this guide, maybe it will be better to stop going any further.
Also, a backup is strongly recommended even though it is unlikely to lose your personal info while trying to root the Galaxy S3 by using this step by step guide. But if anything bad happens, you will have to wipe the system for fixing things up, so as a precaution take your time and backup the SGS3 data before going any further. You can use our backup and restore guides (search through our how to section) for learning how to save almost everything from your phone (contacts list, call logs, internet settings, calendar info, market apps, EFS, text messages and so on), so you have nothing to worry about.
Now, as this is an unofficial operation, you have to apply the pre requisites that are being explained during the following list. Then, you can safely begin the root procedure that can be applied on any Samsung Galaxy S3 GT I9305 that is being powered by the Jelly Bean 4.1.2 XXBMA3 software.

• You will need to use a Windows running computer or notebook; on the same you will download and install some tools.
• The Galaxy S3 and its USB cable must be near you.
• All the security programs that are running on your phone and computer must be deactivated.
• The handset must be fully charged; or if there is more than 60% power left you can skip this step.
• Enable the USB debugging option on your device (from here: “Settings -> Applications -> Development -> USB debugging”).
• Apply this tutorial only if you own the Samsung Galaxy S3 model number GT I9305. Also remember that this root procedure is suitable only with the Android 4.1.2 XXBMA3 firmware.

How to Root Galaxy S3 GT I9305 on Jelly Bean 4.1.2 XXBMA3 OS

1. Download the root package from here.
2. Download Odin.
3. And download Samsung KIES.
4. Save all the files on your computer.
5. Now, use KIES for installing the proper drivers for the Galaxy S3.
6. Extract the root package on your computer.
7. Install and then open Odin.
8. Turn off the Samsung Galaxy S3 and reboot into download mode.
9. You can enter download mode by pressing on Volume Down, Center key and Power button at the same time.
10. Now, use the USB cable and connect the handset with the computer.
11. Take a look on Odin: the ID:COM section should be yellow or blue now and the “added” message should be displayed.
12. If not, remove the USB cable, turn off Odin and re-install the drivers; then repeat the procedure as explained above.
13. Go on Odin and select “PDA”.
14. Pick the “CF-Auto-Root-m3-m3zh-gti9305.tar.md5” file and click on “start”.
15. When the process ends, you can remove the USB cable and reboot your device (also on Odin the “pass” message should be displayed).

If Odin gets stuck while trying to perform the above mentioned steps, unplug the USB cable, force restart your device, wait for a few seconds and then reboot into download mode again. Also, restart Odin on your computer. Then, you can start the root process from the beginning.
Furthermore, in the end you can get a boot loop; if that happens, you need to reboot your Galaxy S3 into recovery mode. Then, from recovery select to wipe the system: “wipe data factory reset” and “wipe cache partition”. Up next choose to reboot the device and that’s all. As a final note, the first boot might take longer than usual, but don’t panic there is nothing wrong with your smartphone.
So, now you know how to easily root the Samsung Galaxy S3 GT I9305 on Jelly Bean 4.1.2 XXBMA3 OS. You can now install a custom recovery image on your phone and use the same for updating with custom ROMs firmware. Stay close as we will bring new tutorials suitable with your device soon along with other Android related tricks and tips. Also, use the comments area from below for sharing your impressions related to the present tutorial, and tell us how things worked for you.

Samsung Galaxy Note 8.0 N5110 can now be rooted using Chainfire’s CF Auto-Root tool. Read this entire post and make sure that you won’t skip any steps so that you will manage to successfully flash the all the required files.
Rooting your tablet will allow you to flash new custom ROMs and other files that can be used to improve its overall appearance and performance. If you root your device and you don’t like Samsung’s Nature UX TouchWiz interface, then you will be able to flash new custom ROMs that are based on Android 4.1 / 4.2 AOSP such as CyanogenMod, AOKP and other similar releases.
In order to successfully root your device, you will first need to read the guidelines below. Here’s what you need know:

• use this tutorial only with the Samsung Galaxy Note 8.0 model number N5110. Don’t try to use this tutorial with any other Android device.
• root your device only if it’s running on Android 4.1.2 Jelly Bean stock firmware.
• rooting the tablet will void the warranty.
• CF Auto Root file will install SuperSU and install a stock Recovery.
• make sure that you have the Samsung USB Drivers installed on your PC. If you don’t have them, then you can download from here.
• disable all the antivirus apps from running on your computer.
• if Samsung KIES software is installed on your PC, then you should make sure to disable it when moving to the tutorial. This program will interfere with Odin and block the rooting process of your tablet.
• make sure that you won’t skip any steps that I have listed in the tutorial.
• enable the USB Debugging setting from the Developer Options menu. If this menu isn’t showing up in Settings, then you should open ‘About device’ and then scroll down and tap 7 times on the Build Number section. It will enable Developer Option in the Settings menu.
• make sure that your tablet’s battery has enough power left in its battery so that it won’t switch off in the middle of the rooting process.
• this guide is for advanced Android users, don’t blame us in case you brick the tablet or you lose any important data in the process.
• in case you cannot complete the root, then you should ask for extra help in comments.
• backup all the important data that you have currently stored on your tablet.

Now that you know all of the above, continue to the next part of this post and learn how to properly root your tablet.

How to root Samsung Galaxy Note 8.0 N5110 on Android 4.1.2 Jelly Bean using CF Auto-Root:

1. Download the CF Auto-Root tool for Galaxy Note 8.0 N5110 from HERE.
   > save the file on your PC and extract its contents to a single folder.
2. Download Odin3 v3.07 from HERE.
   > when the download is complete, extract the files comprised within and save them in a single folder.
3. Power off your tablet completely.
4. Boot it into Download Mode.
   > do it by pressing Volume Down, Home and then Power buttons at the at the same time. Confirm Download Mode boot by pressing Volume Up.
5. Launch Odin executable on your PC.
6. Connect the tablet with your computer using the USB Data cable.
   > wait for Odin to add and recognize the device. When done, you can continue to the next part of this post.
   > if the tablet is not recognized by your computer, then you will be forced to plug the device into another USB port or reinstall the Samsung USB Drivers. The download link is listed in the preparation guide.
7. Next, click the ‘PDA’ button in ODIN.
8. Browse your PC for the ‘CF-Auto-Root-konawifi-konawifixx-gtn5110.tar.md5′ file and load it into Odin.
   > don’t change any default settings of ODIN.
   > make sure that the Re-Partition option is not enabled. Disable it if otherwise.
9. Click the START button when you’re ready for the installation process.
10. When all files are flashed and the root is complete, ODIN will say ‘PASS’ and the device will reboot.
11. When the Samsung boot animation appears, unplug the phone from PC and wait for it to boot into normal mode.
12. Check the App Drawer for the SuperSU app icon to confirm that the root has been applied successfully.
13. Install any new apps that require root or start looking for custom ROMs and other customization files that you can use to improve the overall performance of your tablet.

If ODIN freezes then the root was not completed and you will be forced to disconnect the tablet from PC. Close ODIN and then repeat the entire tutorial once again making sure that you won’t skip any steps that I have listed above. If you need more help, use the comments section.
If ODIN says that the root process was ‘Passed’ but the Galaxy Note 8.0 N5110 doesn’t go past the Samsung boot animation screen, then you will have to power off the device and unplug it from PC. You will have to boot into Recovery Mode and apply factory reset. After that, the tablet will boot into normal mode correctly. If you have any other questions, then you should ask for extra help in comments.
Since this root won’t install any custom Recovery images, then you can choose to visit Google Play Store and use the Goo Manager or ROM Manager app to flash TWRP / CWM Recovery. A custom Recovery will help you install new custom ROMs and other customization files for your tablet.

Use this tutorial only with the Samsung Galaxy S4 ACTIVE shv-e470s smartphone.
CAUTION:THIS ROOTING METHOD IS ONLY FOR THE KOREAN VERSION SHV-E470S!!!
It was tested successfully on Samsung Galaxy S4 Active SHV-E470S Android version 4.2.2
Firmware version:E470SKSUANA1
Abstract:
Do not attempt to root any other smartphones with the files that you wil find in this articles.
This tutorial is destined to be used by advanced Android users.
I won’t be blamed in case you brick the phone or lose any data in the process!!!
Rooting the Galaxy S4 ACTIVE SHV-E470S will revoke its warranty. If you want to restore your phones warranty then you will need to flash an official Samsung Android ROM OS.
Pre-requisites :

1. Download and install the Samsung USB Drivers on your computer
2. Disable Samsung KIES program if you have it installed on your computer
3. Disable any antivirus applications from running on your computer
4. Enable USB Debugging from Developer Options.
   
   • If Developer Options doesn’t appear in Settings, then you need to enable it.
   • go to Settings, then More, open About Device.
   • tap seven times on the Build Number.
   • you will now be enabling Developer Option, go back to main Settings section, scroll down and enable USB Debugging
5. Check your phone’s battery and make sure that there is at least 50% left before the device switches off
6. Read the entire post, don’t skip any steps and the guide should be completed in under ten minutes with success.
7. In case you have trouble completing the guide, then you are free to ask for extra help in comments
8. Download required files (see attachments)
   • Odin3 1.85
   • UPDATE-SuperSU-v1.93
   • unofficial_philz_touch_6.12.8-e470s

Process:
1. Copy the "UPDATE-SuperSU-v1.93.zip" into your phone internal or external memory
2. Extract the contents of the Odin zip file and place them on your computer’s desktop screen.
3. Power off the Galaxy S4 active shv-e470s now.
4. After that you have to boot the device in Android Download Mode (press and hold: volume down,home and power buttons}
5. Launch Odin on your PC as administrator
6. Connect the phone with your computer via USB cable.(make sure antivirus+firewall is now disabled!!)
7. Wait for ODIN to detect your device,(you should see the "added" message) then continue to the next step.
8. If the phone is not recognized by your PC, then you should re-install the Samsung USB Drivers.
9. Go to ODIN’s main window, click on PDA and then find the "unofficial_philz_touch_6.12.8-e470s.tar" Load it in ODIN.
10. Do not change any other Odin default settings
11. Make sure that the Re-Partition option is not enabled
12. When ready, hit the START button for the process to begin.
13. Don’t press any buttons until the process is complete
14. When ODIN completes the process it will show the PASS alert, then the phone will reboot in normal mode. You can unplug the device from PC when the Samsung Galaxy S4 active shv-e470s boot animation screen loads.
15. Now power off your phone again and boot in recovery mode (press and hold: volume up,home and power buttons)
16. Once in recovery mode,find and install the "UPDATE-SuperSU-v1.93.zip" .To do this,in the recovery menu choose the "install zip" option and then find the directory u have saved the zip file and choose it for installing.
17. Wait for the process to finish and then ur phone will reboot.once reboot u can download "root checker" from play store and verify that u have root access.
18. Have fun and enjoy your rooted SHV-E470S Credit Link.