One of All Gsm Solution

Showing posts with label jelly. Show all posts

Tuesday, September 23, 2014

How to Esay Update Galaxy Note 10 1 N8000 with Android 4 1 2 UBCML2 Jelly Bean Official Firmware

Now Samsung has launched another Android Jelly Bean 4.1.2 firmware update with build number bBrasil N8000XXCMI2 for the owner of the Galaxy Note 10.1 (GT-N8000). The new official update is now available as an Over-The-Air (OTA) update via Samsung Kies as well.

Update firmware

PDA: N8000UBCML2
CSC: N8000ZTOCML3
MODEM: N8000UBLL2
Version: Android 4.1.2
Build date: December 16, 2013
Regions: Brazil

Samsung Galaxy Note N8000 10.1 users who missed the OTA update notification or can not access the update over Samsung Kies, can follow the step-by-step guide to install the update manually....

Pre-requisites

Install USB Drivers for Samsung Galaxy Note 10.1 on the computer.
Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
Make a backup of all your important data before following the guide.
The Galaxy Note 10.1 should be factory unlocked and not locked to any particular carrier.
Ensure the battery of the phone is charged more than 80 percent.
The Android 4.1.2 UBCML2 Jelly Bean firmware is compatible only with the 3G + WiFi version of Samsung Galaxy Note 10.1 with model number GT-N8000. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 10.1 by navigating to Settings >> About Phone.

Files Required
1. Android 4.1.2 UBCML2 Jelly Bean Firmware (Mirror Link) for Galaxy Note 10.1 N8000
2. Odin 3.07

Steps to Update Galaxy Note 10.1 N8000 with Android 4.1.2 UBCML2 Jelly Bean Firmware

Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 10.1.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down andPower buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted N8000UBCML2 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Note 10.1 N8000 should be now updated with official Android 4.1.2 UBCML2 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 10.1 N8000 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Sunday, September 21, 2014

Samsung Galaxy Mega 6 3 I9200 I9205 Using Android 4 2 2 Jelly Bean Firmware How to Root Guide

Announced in April 2013, Samsung Galaxy Mega 6.3 is now available for purchase in several countries in the world. The Samsung Galaxy Mega 6.3 - as in a 6.3" Lcd, comes with 3G (GT-I9200) and LTE (GT-I9205) version that runs on Android 4.2.2 Jelly Bean.

Followed by the market rollout, XDA-Developers member VCore has released root method for both I9200 and I9205 version of Galaxy Mega 6.3.

Samsung Galaxy Mega 6.3 users who wish to root their devices, may follow our step-by-step guide.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-requisites
1. Install USB Driver for Samsung Galaxy Mega 6.3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Mega 6.3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Root Package file works only on Samsung Galaxy Mega 6.3. Applying these to any incorrect variant might brick the device. Verify the model number of the Galaxy Mega 6.3 by navigating to Settings >> About Phone.

Files Required
1. Root Package for Galaxy Mega 6.3 (vcoreroot-v2.tar)
2. Odin 3.07 (Mirror Link)
Steps to Root Galaxy Mega 6.3 Running on Android 4.2.2 Jelly Bean Firmware
Step 1: Extract Odin 3.07 file using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy Mega 6.3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Mega 6.3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the vcoreroot-v2.tar file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Mega 6.3 running on Android 4.2.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Friday, September 12, 2014

How to Rooting Galaxy S3 GT I9305 on Jelly Bean 4 1 2 XXBMA3 OS

As the official Jelly Bean update has been released for the Samsung Galaxy S3 from a while, now all the users who applied the stock firmware on their devices are looking for a root procedure that can be performed on the new OS. In order to help you out, today we will be checking in how to easily gain root access for the Galaxy S3 GT I9305 that runs on the official Android 4.1.2 XXBMA3 software. Take note though that this tutorial is being suitable only for the S3 model number I9305 that is being powered by the mentioned ROM, so don’t try to complete the steps from bellow for a similar device.
It is important to have a rooted handset because who knows when you will need access to its internal system. On a rooted OS you can install complex apps that requires root access in order to work properly (such as CWM recovery and some backup and restore tools), you can remove in-built programs in order to improve the speeds, optimize and customize the system and so on. The best part is that once the root access is granted you can start updating your Galaxy S3 with the latest custom ROMs, which are being perfect for those who want to try something different than the classic or default Jelly Bean experience.
In a few words, if you want to properly use your smartphone, gaining root access is a must have. Actually, this will be the first step to make if you want to power up the Galaxy S3 performances, so why not to try the same? The root procedure can be easily performed, the present step by step guide being all that you need. You have all the aspects needed explained and detailed below, so let’s get started. Anyway, do read all the following lines or else you can end up in bricking your phone, and I know that you don’t want that to happen.Above, we have seen which the advantages that come with a root operation are. Well, now let’s see if there are negative aspects too. As usual, when we are talking about unofficial procedures, there are some things that must be revealed. Related to our purpose, the most relevant one is referring to your Samsung Galaxy S3 I9305 warranty. By trying to root your Galaxy S3 that runs the Jelly Bean 4.1.2 XXBMA3 firmware you will make changes into the internal system of your device. This means that the warranty will be void. This aspect can’t be avoided, so if you are not sure that you can safely complete this guide, maybe it will be better to stop going any further.
Also, a backup is strongly recommended even though it is unlikely to lose your personal info while trying to root the Galaxy S3 by using this step by step guide. But if anything bad happens, you will have to wipe the system for fixing things up, so as a precaution take your time and backup the SGS3 data before going any further. You can use our backup and restore guides (search through our how to section) for learning how to save almost everything from your phone (contacts list, call logs, internet settings, calendar info, market apps, EFS, text messages and so on), so you have nothing to worry about.
Now, as this is an unofficial operation, you have to apply the pre requisites that are being explained during the following list. Then, you can safely begin the root procedure that can be applied on any Samsung Galaxy S3 GT I9305 that is being powered by the Jelly Bean 4.1.2 XXBMA3 software.

You will need to use a Windows running computer or notebook; on the same you will download and install some tools.
The Galaxy S3 and its USB cable must be near you.
All the security programs that are running on your phone and computer must be deactivated.
The handset must be fully charged; or if there is more than 60% power left you can skip this step.
Enable the USB debugging option on your device (from here: “Settings -> Applications -> Development -> USB debugging”).
Apply this tutorial only if you own the Samsung Galaxy S3 model number GT I9305. Also remember that this root procedure is suitable only with the Android 4.1.2 XXBMA3 firmware.

How to Root Galaxy S3 GT I9305 on Jelly Bean 4.1.2 XXBMA3 OS

Download the root package from here.
Download Odin.
And download Samsung KIES.
Save all the files on your computer.
Now, use KIES for installing the proper drivers for the Galaxy S3.
Extract the root package on your computer.
Install and then open Odin.
Turn off the Samsung Galaxy S3 and reboot into download mode.
You can enter download mode by pressing on Volume Down, Center key and Power button at the same time.
Now, use the USB cable and connect the handset with the computer.
Take a look on Odin: the ID:COM section should be yellow or blue now and the “added” message should be displayed.
If not, remove the USB cable, turn off Odin and re-install the drivers; then repeat the procedure as explained above.
Go on Odin and select “PDA”.
Pick the “CF-Auto-Root-m3-m3zh-gti9305.tar.md5” file and click on “start”.
When the process ends, you can remove the USB cable and reboot your device (also on Odin the “pass” message should be displayed).

If Odin gets stuck while trying to perform the above mentioned steps, unplug the USB cable, force restart your device, wait for a few seconds and then reboot into download mode again. Also, restart Odin on your computer. Then, you can start the root process from the beginning.
Furthermore, in the end you can get a boot loop; if that happens, you need to reboot your Galaxy S3 into recovery mode. Then, from recovery select to wipe the system: “wipe data factory reset” and “wipe cache partition”. Up next choose to reboot the device and that’s all. As a final note, the first boot might take longer than usual, but don’t panic there is nothing wrong with your smartphone.
So, now you know how to easily root the Samsung Galaxy S3 GT I9305 on Jelly Bean 4.1.2 XXBMA3 OS. You can now install a custom recovery image on your phone and use the same for updating with custom ROMs firmware. Stay close as we will bring new tutorials suitable with your device soon along with other Android related tricks and tips. Also, use the comments area from below for sharing your impressions related to the present tutorial, and tell us how things worked for you.

Thursday, September 11, 2014

Samsung Galaxy Ace 3 LTE S7275R with Android 4 2 2 XXUANA3 Jelly Bean Official Firmware How To Guide

Samsung Galaxy Ace 3 with LTE connectivity has just received the latest Android 4.2.2 Jelly Bean update with firmware build number S7275RXXUANA3. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: S7275RXXUANA3
CSC: S7275ROLBANA1
MODEM: S7275RXXUAML1
Version: Android 4.2.2
Build date: Jan 13, 2014
Regions: Singapore, Malaysia
Samsung Galaxy Ace 3 (LTE) S7275R users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Ace 3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Ace 3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUANA3 Jelly Bean firmware is compatible only with the LTE version of Samsung Galaxy Ace 3 (GT-S7275R). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Ace 3 by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUANA3 Jelly Bean Firmware (Mirror Link) for Galaxy Ace 3 (LTE) S7275R
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Ace 3 (LTE) S7275R with Android 4.2.2 XXUANA3 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Ace 3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Ace 3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted S7275RXXUANA3 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Ace 3 (LTE) S7275R should be now updated with Android 4.2.2 XXUANA3 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Ace 3 (LTE) S7275R stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Wednesday, September 10, 2014

Samsung Galaxy Mega 5 8 I9152 with Android 4 2 2 XXUANA1 Jelly Bean Official Firmware Install Easily Using Odin Guide

Samsung Galaxy Mega 5.8 with Dual SIM card slot (GT-I9152) has received the latest Android 4.2.2 Jelly Bean update with firmware build number I9152XXUANA1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: I9152XXUANA1
CSC: I9152OXEANA1
MODEM: I9152XXUANA1
Version: Android 4.2.2
Build date: Jan 28, 2014
Regions: Russia, Kazakhstan, Ukraine, Uzbekistan
Samsung Galaxy Mega 5.8 I9152 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Mega 5.8 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Mega 5.8 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUANA1 Jelly Bean firmware is compatible only with the Samsung Galaxy Mega 5.8 (GT-I9152). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Mega 5.8 by navigating to Settings >> About Phone.
Files Required
1. Android 4.2.2 XXUANA1 Jelly Bean Firmware (Mirror Link) for Galaxy Mega 5.8 I9152
2. Odin 3.07

Steps to Update Galaxy Mega 5.8 I9152 with Android 4.2.2 XXUANA1 Jelly Bean Firmware
Related Article:Samsung Galaxy Mega 5.8 I9152 with Android 4.2.2 XWUANA6 Jelly Bean Official Firmware & How to Update Using Odin Guide
Samsung Galaxy Mega 5.8 I9152 with Android 4.2.2 XWUANA5 Jelly Bean Official Firmware & Install Odin Guide
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Mega 5.8.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Mega 5.8 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9152XXUANA1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy Mega 5.8 I9152 should be now updated with Android 4.2.2 XXUANA1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy Mega 5.8 I9152 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Mega 5.8 I9152 running on Android 4.2.2 Jelly Bean firmware.

Friday, September 5, 2014

Rooting Samsung Galaxy Note 8 0 N5110 on Android 4 1 2 Jelly Bean with CF Auto Root

Samsung Galaxy Note 8.0 N5110 can now be rooted using Chainfire’s CF Auto-Root tool. Read this entire post and make sure that you won’t skip any steps so that you will manage to successfully flash the all the required files.
Rooting your tablet will allow you to flash new custom ROMs and other files that can be used to improve its overall appearance and performance. If you root your device and you don’t like Samsung’s Nature UX TouchWiz interface, then you will be able to flash new custom ROMs that are based on Android 4.1 / 4.2 AOSP such as CyanogenMod, AOKP and other similar releases.
In order to successfully root your device, you will first need to read the guidelines below. Here’s what you need know:

use this tutorial only with the Samsung Galaxy Note 8.0 model number N5110. Don’t try to use this tutorial with any other Android device.
root your device only if it’s running on Android 4.1.2 Jelly Bean stock firmware.
rooting the tablet will void the warranty.
CF Auto Root file will install SuperSU and install a stock Recovery.
make sure that you have the Samsung USB Drivers installed on your PC. If you don’t have them, then you can download from here.
disable all the antivirus apps from running on your computer.
if Samsung KIES software is installed on your PC, then you should make sure to disable it when moving to the tutorial. This program will interfere with Odin and block the rooting process of your tablet.
make sure that you won’t skip any steps that I have listed in the tutorial.
enable the USB Debugging setting from the Developer Options menu. If this menu isn’t showing up in Settings, then you should open ‘About device’ and then scroll down and tap 7 times on the Build Number section. It will enable Developer Option in the Settings menu.
make sure that your tablet’s battery has enough power left in its battery so that it won’t switch off in the middle of the rooting process.
this guide is for advanced Android users, don’t blame us in case you brick the tablet or you lose any important data in the process.
in case you cannot complete the root, then you should ask for extra help in comments.
backup all the important data that you have currently stored on your tablet.

Now that you know all of the above, continue to the next part of this post and learn how to properly root your tablet.

How to root Samsung Galaxy Note 8.0 N5110 on Android 4.1.2 Jelly Bean using CF Auto-Root:

Download the CF Auto-Root tool for Galaxy Note 8.0 N5110 from HERE.
> save the file on your PC and extract its contents to a single folder.
Download Odin3 v3.07 from HERE.
> when the download is complete, extract the files comprised within and save them in a single folder.
Power off your tablet completely.
Boot it into Download Mode.
> do it by pressing Volume Down, Home and then Power buttons at the at the same time. Confirm Download Mode boot by pressing Volume Up.
Launch Odin executable on your PC.
Connect the tablet with your computer using the USB Data cable.
> wait for Odin to add and recognize the device. When done, you can continue to the next part of this post.
> if the tablet is not recognized by your computer, then you will be forced to plug the device into another USB port or reinstall the Samsung USB Drivers. The download link is listed in the preparation guide.
Next, click the ‘PDA’ button in ODIN.
Browse your PC for the ‘CF-Auto-Root-konawifi-konawifixx-gtn5110.tar.md5′ file and load it into Odin.
> don’t change any default settings of ODIN.
> make sure that the Re-Partition option is not enabled. Disable it if otherwise.
Click the START button when you’re ready for the installation process.
When all files are flashed and the root is complete, ODIN will say ‘PASS’ and the device will reboot.
When the Samsung boot animation appears, unplug the phone from PC and wait for it to boot into normal mode.
Check the App Drawer for the SuperSU app icon to confirm that the root has been applied successfully.
Install any new apps that require root or start looking for custom ROMs and other customization files that you can use to improve the overall performance of your tablet.

If ODIN freezes then the root was not completed and you will be forced to disconnect the tablet from PC. Close ODIN and then repeat the entire tutorial once again making sure that you won’t skip any steps that I have listed above. If you need more help, use the comments section.
If ODIN says that the root process was ‘Passed’ but the Galaxy Note 8.0 N5110 doesn’t go past the Samsung boot animation screen, then you will have to power off the device and unplug it from PC. You will have to boot into Recovery Mode and apply factory reset. After that, the tablet will boot into normal mode correctly. If you have any other questions, then you should ask for extra help in comments.
Since this root won’t install any custom Recovery images, then you can choose to visit Google Play Store and use the Goo Manager or ROM Manager app to flash TWRP / CWM Recovery. A custom Recovery will help you install new custom ROMs and other customization files for your tablet.

Wednesday, September 3, 2014

Samsung Galaxy Grand Duos I9082 with Android 4 2 2 XXUBNB2 Jelly Bean Official Firmware How to Update Using Odin Guide

Samsung Galaxy Grand Duos (GT-I9082) users in India has received a new Android 4.2.2 Jelly Bean update with firmware build number I9082XXUBNB2. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: I9082XXUBNB2
CSC: I9082ODDBNB1
MODEM: I9082DDUBNB1
Version: Android 4.2.2
Build date: Feb 06, 2014
Regions: India, Bangladesh, Nepal, Sri Lanka
Samsung Galaxy Grand Duos I9082 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Grand Duos on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Grand Duos should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUBNB2 Jelly Bean firmware is compatible only with the Galaxy Grand Duos (GT-I9082). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand Duos by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUBNB2 Jelly Bean Firmware (Mirror Link) for Galaxy Grand Duos I9082
2. Odin 3.07

Steps to Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBNB2 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Grand Duos.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Grand Duos to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9082XXUBNB2 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Grand Duos I9082 should be now updated with Android 4.2.2 XXUBNB2 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Grand Duos I9082 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Grand Duos I9082 running on Android 4.2.2 Jelly Bean firmware.

Saturday, August 30, 2014

Samsung Galaxy S4 ACTIVE shv e470s Android 4 2 2 Jelly Bean Firmware Using How To Rooting Guide

Use this tutorial only with the Samsung Galaxy S4 ACTIVE shv-e470s smartphone.
CAUTION:THIS ROOTING METHOD IS ONLY FOR THE KOREAN VERSION SHV-E470S!!!
It was tested successfully on Samsung Galaxy S4 Active SHV-E470S Android version 4.2.2
Firmware version:E470SKSUANA1
Abstract:
Do not attempt to root any other smartphones with the files that you wil find in this articles.
This tutorial is destined to be used by advanced Android users.
I won’t be blamed in case you brick the phone or lose any data in the process!!!
Rooting the Galaxy S4 ACTIVE SHV-E470S will revoke its warranty. If you want to restore your phones warranty then you will need to flash an official Samsung Android ROM OS.
Pre-requisites :

Download and install the Samsung USB Drivers on your computer
Disable Samsung KIES program if you have it installed on your computer
Disable any antivirus applications from running on your computer
Enable USB Debugging from Developer Options.
- If Developer Options doesn’t appear in Settings, then you need to enable it.
- go to Settings, then More, open About Device.
- tap seven times on the Build Number.
- you will now be enabling Developer Option, go back to main Settings section, scroll down and enable USB Debugging
Check your phone’s battery and make sure that there is at least 50% left before the device switches off
Read the entire post, don’t skip any steps and the guide should be completed in under ten minutes with success.
In case you have trouble completing the guide, then you are free to ask for extra help in comments
Download required files (see attachments)

Process:
1. Copy the "UPDATE-SuperSU-v1.93.zip" into your phone internal or external memory
2. Extract the contents of the Odin zip file and place them on your computer’s desktop screen.
3. Power off the Galaxy S4 active shv-e470s now.
4. After that you have to boot the device in Android Download Mode (press and hold: volume down,home and power buttons}
5. Launch Odin on your PC as administrator
6. Connect the phone with your computer via USB cable.(make sure antivirus+firewall is now disabled!!)
7. Wait for ODIN to detect your device,(you should see the "added" message) then continue to the next step.
8. If the phone is not recognized by your PC, then you should re-install the Samsung USB Drivers.
9. Go to ODIN’s main window, click on PDA and then find the "unofficial_philz_touch_6.12.8-e470s.tar" Load it in ODIN.
10. Do not change any other Odin default settings
11. Make sure that the Re-Partition option is not enabled
12. When ready, hit the START button for the process to begin.
13. Don’t press any buttons until the process is complete
14. When ODIN completes the process it will show the PASS alert, then the phone will reboot in normal mode. You can unplug the device from PC when the Samsung Galaxy S4 active shv-e470s boot animation screen loads.
15. Now power off your phone again and boot in recovery mode (press and hold: volume up,home and power buttons)
16. Once in recovery mode,find and install the "UPDATE-SuperSU-v1.93.zip" .To do this,in the recovery menu choose the "install zip" option and then find the directory u have saved the zip file and choose it for installing.
17. Wait for the process to finish and then ur phone will reboot.once reboot u can download "root checker" from play store and verify that u have root access.
18. Have fun and enjoy your rooted SHV-E470S Credit Link.

Sunday, August 24, 2014

How to Update Samsung Galaxy Fame S6810L with Android 4 1 2 UBANA1 Jelly Bean Official Firmware Using Odin Guide

The Latin America version of Samsung Galaxy Fame with model number GT-S6810L has already received the latest Android 4.1.2 Jelly Bean Over-The-Air (OTA) update with firmware build number S6810LUBANA1. The new official firmware is currently available for users in Argentina.
Firmware details
PDA: S6810LUBANA1
CSC: S6810LPSPANA2
MODEM: S6810LUBAML1
Version: Android 4.1.2
Build date: Jan 02, 2014
Regions: Argentina
Samsung Galaxy Fame S6810L users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Fame on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Fame should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.1.2 UBANA1 Jelly Bean firmware is compatible only with Samsung Galaxy Fame (GT-S6810L). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Fame by navigating to Settings >> About Phone.

Files Required
1. Android 4.1.2 UBANA1 Jelly Bean Firmware for Galaxy Fame S6810L
2. Odin 3.07
Related Article:How to Update Galaxy Fame S6810 with Android 4.1.2 XXAMJ1 Jelly Bean Official Firmware Steps to Update Galaxy Fame S6810L with Android 4.1.2 UBANA1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Fame.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Fame to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted S6810LUBANA1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Fame S6810L should be now updated with Android 4.1.2 UBANA1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Fame S6810L stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Fame S6810 running on Android 4.1.2 Jelly Bean firmware.

Wednesday, August 20, 2014

How To Install UBUAML2 Android 4 2 2 Jelly Bean Firmware on Galaxy Mega 5 8 I9150 Guide

Samsung launches Android 4.2.2 UBUAML2 official firmware update for the Galaxy mega Jelly Bean 5.8 GT - I9150. The firmware update is launched in various countries in the region including Argentina Brazil and Colombia, and also can be downloaded for manual updates. You can also update your device firmware via Kies or OTA update. Because the device comes with Android 4.2.2 Jelly Bean out of the box, this new firmware update just brings bug fixes and performance tweaks. Continue reading this guide to learn how to get an official stock I9150UBUAML2 Jelly Bean Android 4.2.2 firmware running on the Galaxy mega 5.8 GT - I9150.

Warning:

This tutorial is only for Galaxy Mega 5.8 GT-I9150. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

Backup your device data. You can follow our ultimate backup guide.
Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.
You already have USB Driver Installed for Galaxy Mega 5.8 GT-I9150 in your PC. [Download USB Drivers]
Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Mega 5.8 GT-I9150. Guide

How To Update Galaxy Mega 5.8 GT-I9150 via OTA

First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
Now, go to Android app drawer and then select Settings.
Then locate About Device and tap on it.
Next select Software update from About device screen.
Then tap on Update option.
You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
Soon your device will reboot to complete the installation process.

If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Mega 5.8 GT-I9150 via Kies

Make sure you have stable internet connection on your computer.
Now download and install Samsung Kies on your computer.
Turn on your device (if it off) and then connect it to computer with USB cable.
Run Samsung Kies and wait for it to detect your device.
You should see a New Firmware Upgrade is available at Samsung Kies home screen.
Press the Firmware Upgrade button to proceed.
Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.

Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

I9150UBUAML2 Android 4.2.2 Jelly Bean Firmware Downloads

Argentina: I9150UBUAML2 I9150UUBAML2_ARO.zip

Colombia (Comcel): I9150UBUAML2 I9150UWAAML2_COM.zip

How To Install I9150UBUAML2 Android 4.2.2 Jelly Bean On Galaxy Mega 5.8 GT-I9150 Manually

Download Odin v3.09.
Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy Mega 5.8 GT-I9150 in Download Mode by pressing and holding down the Home &Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that .tar.md5 file that you get in Step 2. If you are using old Odin then add the file to PDA button.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy Mega 5.8 GT-I9150 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Congrats! You just updated your Galaxy Mega 5.8 GT-I9150 to Android 4.2.2 Jelly Bean firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy Mega 5.8 GT-I9150

If Galaxy Mega 5.8 GT-I9150 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:

Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option

Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.2.2 Jelly Bean experience.

Wednesday, August 13, 2014

Android 4 3 Jelly Bean update for Samsung Galaxy S4 LTE model released S3 version coming soon

The Android 4.3 Jelly Bean update for the Samsung has S4 has begun to roll out to its international models this week.

The latest Android 4.3. 1 official firmware has been releaesd by Samsung for Galaxy S4 I9500 and I9505 models, which includes the LTE models.

Samsung Galaxy S4 owners in Germany with the unlocked GT-19505 model have already received the OS update. Updates to Galaxy S4 users in North America will be available shortly.

The upgrade brings compatibility with the Galaxy Gear smartwatch, and provides a friendlier user interface with improved graphics performance, stability and security.

Users must beware that once their device is upgraded to Android 4.3, downgrading is not a possibility due to security concerns.

Click here for the full guide to updating the Exynos 5 octa-core version of Galaxy S4 with model number GT-I9500 with the Android 4.3.

HTC owners on Americas AT&T and Sprint network have already received the Android 4.3 update.

The Android 4.3 Jelly Bean update for the Samsung Galaxy S4 has begun to roll out right on time, aspromised by Samsung during the Galaxy Note 3 unveiling in September.

Samsung also announced that it will upgrade its mobile OS for the Galaxy S3 some time in October.

All software updates will be available over-the-air (OTA).

Android 4.3 was only launched by Google in the summer with the launch of the Nexus 7. The tech giant is expected to launch Android 4.4 KitKat with the highly anticipated Nexus 5 and Nexus 10 2 by the end of this month. However, Android 4.4 KitKat is not expected to roll out to any other Samsung devices before the end of this year.

How to esay Update Galaxy S3 I9300 with Android 4 3 XXUGML2 Jelly Bean Official Firmware

Samsung Galaxy S3 (GT-I9300) users in Switzerland just got the Android 4.3 Jelly Bean update to the latest firmware build number I9300XXUGML2. New official firmware and is currently available as an Over-The-Air (OTA) update via Samsung Kies as well.

Update firmware
PDA: I9300XXUGML2
CSC: I9300AUTGML1
MODEM: I9300XXUGMK6
Version: Android 4.3
Build date: December 13, 2013
Regional: Switzerland

users of Samsung Galaxy S3 I9300 who missed the OTA update notification or can not access the update via Samsung Kies, and those who live outside the area supported can now download and install the same manually, using a step-by-step guide.

Pre-requisites

1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.3 XXUGML2 Jelly Bean firmware is compatible only with the international version of Samsung Galaxy S3 (GT-I9300). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

Files Required

Android 4.3 XXUGML2 Jelly Bean Firmware (Mirror Link) for Galaxy S3 I9300
Odin 3.07

Steps to Update Galaxy S3 I9300 with Android 4.3 XXUGML2 Jelly Bean Firmware

Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy S3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 7: Select the following files in Odin from extracted I9300XXUGML2 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S3 I9300 should be now updated with official Android 4.3 XXUGML2 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S3 I9300 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Saturday, August 9, 2014

Samsung Galaxy S4 Android 4 2 2 Jelly Bean System Dump leaked firmware build I9500XXUAMCH confirms Exynos 5 Octa model

The Galaxy S4 should be released worldwide late April/ early May but, it seems like developers and hackers started to get their hands of devices already. The I9500XXUAMCH firmware files have been leaked and it confirms the Android 4.2.2 JDQ39 Jelly Bean as stock ROM.
The entire System of the Samsung Galaxy S4 I9500 is huge, as it measures 2.2 GB when unpacked and it will take some time before the download is complete. The zip file measure exactly 1549.8 MB and if you’re a development enthusiast then you should take a look at this S4 system dump and learn a thing or two about the software used for this device. The I9500XXUAMCH build is listed as March 23rd and it uses the Android 4.2.2 JDQ39 firmware. The file has been posted by SamMobile. The source post also features the Galaxy S4 build.prop files and some screenshots of the Galaxy S4 I9500 running the latest Jelly Bean OS.
The system dump is great for the dev community and we’re expecting new SGS4 goodies will be available soon besides the S Voice APK, Ringtones, Wallpapers and Icons. If you want to take a peek at the Galaxy S4 system dump then you should download it from here.
Samsung Galaxy S4 I9500 uses the Exynos 5 Octo-core CPU, 2GB RAM, 5inch Super AMOLED Full HD display, Gorilla Glass 3, 16/ 32 / 64GB internal storage, supports up to 64GB external SD card storage, 13MP camera, Wi-Fi AC, NFC, Infrared port, 2600 mAh battery etc. This is one of the best devices of the first part of 2013, we’re saying that because the end of 2013 will surely bring the new Nexus device which will better, spec-wise.
Download the I9500XXUAMCH system dump of Galaxy S4 and snoot around its files, as you might find some interesting features and release them for all Android enthusiasts out there. Until the smartphone hits the stores worldwide we will get tons of leaks and possibly even some new custom ROMs that are based on the SGS4 stock OS.