One of All Gsm Solution

Showing posts with label with. Show all posts

Tuesday, September 23, 2014

How to Esay Update Galaxy Note 10 1 N8000 with Android 4 1 2 UBCML2 Jelly Bean Official Firmware

Now Samsung has launched another Android Jelly Bean 4.1.2 firmware update with build number bBrasil N8000XXCMI2 for the owner of the Galaxy Note 10.1 (GT-N8000). The new official update is now available as an Over-The-Air (OTA) update via Samsung Kies as well.

Update firmware

PDA: N8000UBCML2
CSC: N8000ZTOCML3
MODEM: N8000UBLL2
Version: Android 4.1.2
Build date: December 16, 2013
Regions: Brazil

Samsung Galaxy Note N8000 10.1 users who missed the OTA update notification or can not access the update over Samsung Kies, can follow the step-by-step guide to install the update manually....

Pre-requisites

Install USB Drivers for Samsung Galaxy Note 10.1 on the computer.
Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
Make a backup of all your important data before following the guide.
The Galaxy Note 10.1 should be factory unlocked and not locked to any particular carrier.
Ensure the battery of the phone is charged more than 80 percent.
The Android 4.1.2 UBCML2 Jelly Bean firmware is compatible only with the 3G + WiFi version of Samsung Galaxy Note 10.1 with model number GT-N8000. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 10.1 by navigating to Settings >> About Phone.

Files Required
1. Android 4.1.2 UBCML2 Jelly Bean Firmware (Mirror Link) for Galaxy Note 10.1 N8000
2. Odin 3.07

Steps to Update Galaxy Note 10.1 N8000 with Android 4.1.2 UBCML2 Jelly Bean Firmware

Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 10.1.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down andPower buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted N8000UBCML2 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Note 10.1 N8000 should be now updated with official Android 4.1.2 UBCML2 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 10.1 N8000 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Thursday, September 18, 2014

Nokia 6303c usb Problem with Jumper Solution

Nokia 6303c usb solution

Saturday, September 13, 2014

Nokia 1680 camera Problem with Jumper Solution

Nokia 1680 camera solution...100% working..

Thursday, September 11, 2014

Samsung Galaxy Ace 3 LTE S7275R with Android 4 2 2 XXUANA3 Jelly Bean Official Firmware How To Guide

Samsung Galaxy Ace 3 with LTE connectivity has just received the latest Android 4.2.2 Jelly Bean update with firmware build number S7275RXXUANA3. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: S7275RXXUANA3
CSC: S7275ROLBANA1
MODEM: S7275RXXUAML1
Version: Android 4.2.2
Build date: Jan 13, 2014
Regions: Singapore, Malaysia
Samsung Galaxy Ace 3 (LTE) S7275R users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Ace 3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Ace 3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUANA3 Jelly Bean firmware is compatible only with the LTE version of Samsung Galaxy Ace 3 (GT-S7275R). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Ace 3 by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUANA3 Jelly Bean Firmware (Mirror Link) for Galaxy Ace 3 (LTE) S7275R
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Ace 3 (LTE) S7275R with Android 4.2.2 XXUANA3 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Ace 3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Ace 3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted S7275RXXUANA3 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Ace 3 (LTE) S7275R should be now updated with Android 4.2.2 XXUANA3 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Ace 3 (LTE) S7275R stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Wednesday, September 10, 2014

Samsung Galaxy Mega 5 8 I9152 with Android 4 2 2 XXUANA1 Jelly Bean Official Firmware Install Easily Using Odin Guide

Samsung Galaxy Mega 5.8 with Dual SIM card slot (GT-I9152) has received the latest Android 4.2.2 Jelly Bean update with firmware build number I9152XXUANA1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: I9152XXUANA1
CSC: I9152OXEANA1
MODEM: I9152XXUANA1
Version: Android 4.2.2
Build date: Jan 28, 2014
Regions: Russia, Kazakhstan, Ukraine, Uzbekistan
Samsung Galaxy Mega 5.8 I9152 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Mega 5.8 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Mega 5.8 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUANA1 Jelly Bean firmware is compatible only with the Samsung Galaxy Mega 5.8 (GT-I9152). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Mega 5.8 by navigating to Settings >> About Phone.
Files Required
1. Android 4.2.2 XXUANA1 Jelly Bean Firmware (Mirror Link) for Galaxy Mega 5.8 I9152
2. Odin 3.07

Steps to Update Galaxy Mega 5.8 I9152 with Android 4.2.2 XXUANA1 Jelly Bean Firmware
Related Article:Samsung Galaxy Mega 5.8 I9152 with Android 4.2.2 XWUANA6 Jelly Bean Official Firmware & How to Update Using Odin Guide
Samsung Galaxy Mega 5.8 I9152 with Android 4.2.2 XWUANA5 Jelly Bean Official Firmware & Install Odin Guide
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Mega 5.8.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Mega 5.8 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9152XXUANA1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy Mega 5.8 I9152 should be now updated with Android 4.2.2 XXUANA1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy Mega 5.8 I9152 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Mega 5.8 I9152 running on Android 4.2.2 Jelly Bean firmware.

Friday, September 5, 2014

Rooting Samsung Galaxy Note 8 0 N5110 on Android 4 1 2 Jelly Bean with CF Auto Root

Samsung Galaxy Note 8.0 N5110 can now be rooted using Chainfire’s CF Auto-Root tool. Read this entire post and make sure that you won’t skip any steps so that you will manage to successfully flash the all the required files.
Rooting your tablet will allow you to flash new custom ROMs and other files that can be used to improve its overall appearance and performance. If you root your device and you don’t like Samsung’s Nature UX TouchWiz interface, then you will be able to flash new custom ROMs that are based on Android 4.1 / 4.2 AOSP such as CyanogenMod, AOKP and other similar releases.
In order to successfully root your device, you will first need to read the guidelines below. Here’s what you need know:

use this tutorial only with the Samsung Galaxy Note 8.0 model number N5110. Don’t try to use this tutorial with any other Android device.
root your device only if it’s running on Android 4.1.2 Jelly Bean stock firmware.
rooting the tablet will void the warranty.
CF Auto Root file will install SuperSU and install a stock Recovery.
make sure that you have the Samsung USB Drivers installed on your PC. If you don’t have them, then you can download from here.
disable all the antivirus apps from running on your computer.
if Samsung KIES software is installed on your PC, then you should make sure to disable it when moving to the tutorial. This program will interfere with Odin and block the rooting process of your tablet.
make sure that you won’t skip any steps that I have listed in the tutorial.
enable the USB Debugging setting from the Developer Options menu. If this menu isn’t showing up in Settings, then you should open ‘About device’ and then scroll down and tap 7 times on the Build Number section. It will enable Developer Option in the Settings menu.
make sure that your tablet’s battery has enough power left in its battery so that it won’t switch off in the middle of the rooting process.
this guide is for advanced Android users, don’t blame us in case you brick the tablet or you lose any important data in the process.
in case you cannot complete the root, then you should ask for extra help in comments.
backup all the important data that you have currently stored on your tablet.

Now that you know all of the above, continue to the next part of this post and learn how to properly root your tablet.

How to root Samsung Galaxy Note 8.0 N5110 on Android 4.1.2 Jelly Bean using CF Auto-Root:

Download the CF Auto-Root tool for Galaxy Note 8.0 N5110 from HERE.
> save the file on your PC and extract its contents to a single folder.
Download Odin3 v3.07 from HERE.
> when the download is complete, extract the files comprised within and save them in a single folder.
Power off your tablet completely.
Boot it into Download Mode.
> do it by pressing Volume Down, Home and then Power buttons at the at the same time. Confirm Download Mode boot by pressing Volume Up.
Launch Odin executable on your PC.
Connect the tablet with your computer using the USB Data cable.
> wait for Odin to add and recognize the device. When done, you can continue to the next part of this post.
> if the tablet is not recognized by your computer, then you will be forced to plug the device into another USB port or reinstall the Samsung USB Drivers. The download link is listed in the preparation guide.
Next, click the ‘PDA’ button in ODIN.
Browse your PC for the ‘CF-Auto-Root-konawifi-konawifixx-gtn5110.tar.md5′ file and load it into Odin.
> don’t change any default settings of ODIN.
> make sure that the Re-Partition option is not enabled. Disable it if otherwise.
Click the START button when you’re ready for the installation process.
When all files are flashed and the root is complete, ODIN will say ‘PASS’ and the device will reboot.
When the Samsung boot animation appears, unplug the phone from PC and wait for it to boot into normal mode.
Check the App Drawer for the SuperSU app icon to confirm that the root has been applied successfully.
Install any new apps that require root or start looking for custom ROMs and other customization files that you can use to improve the overall performance of your tablet.

If ODIN freezes then the root was not completed and you will be forced to disconnect the tablet from PC. Close ODIN and then repeat the entire tutorial once again making sure that you won’t skip any steps that I have listed above. If you need more help, use the comments section.
If ODIN says that the root process was ‘Passed’ but the Galaxy Note 8.0 N5110 doesn’t go past the Samsung boot animation screen, then you will have to power off the device and unplug it from PC. You will have to boot into Recovery Mode and apply factory reset. After that, the tablet will boot into normal mode correctly. If you have any other questions, then you should ask for extra help in comments.
Since this root won’t install any custom Recovery images, then you can choose to visit Google Play Store and use the Goo Manager or ROM Manager app to flash TWRP / CWM Recovery. A custom Recovery will help you install new custom ROMs and other customization files for your tablet.

Wednesday, September 3, 2014

Samsung Galaxy Grand Duos I9082 with Android 4 2 2 XXUBNB2 Jelly Bean Official Firmware How to Update Using Odin Guide

Samsung Galaxy Grand Duos (GT-I9082) users in India has received a new Android 4.2.2 Jelly Bean update with firmware build number I9082XXUBNB2. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: I9082XXUBNB2
CSC: I9082ODDBNB1
MODEM: I9082DDUBNB1
Version: Android 4.2.2
Build date: Feb 06, 2014
Regions: India, Bangladesh, Nepal, Sri Lanka
Samsung Galaxy Grand Duos I9082 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Grand Duos on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Grand Duos should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUBNB2 Jelly Bean firmware is compatible only with the Galaxy Grand Duos (GT-I9082). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand Duos by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUBNB2 Jelly Bean Firmware (Mirror Link) for Galaxy Grand Duos I9082
2. Odin 3.07

Steps to Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBNB2 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Grand Duos.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Grand Duos to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9082XXUBNB2 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Grand Duos I9082 should be now updated with Android 4.2.2 XXUBNB2 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Grand Duos I9082 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Grand Duos I9082 running on Android 4.2.2 Jelly Bean firmware.

Monday, September 1, 2014

Sony Xperia L C2105 Flash Repair Done With Factory Firmware

Sony Xperia L ( C2105 ) Flash Repair Done With Factory Firmware

Here Flash Log:-

Code:

16/033/2013 12:33:42 - INFO - <- This level is successfully initialized
16/033/2013 12:33:42 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/033/2013 12:33:42 - INFO - Device disconnected
16/034/2013 12:34:39 - INFO - Selected Sony Xperia L (C2105) / 15.3.A.0.26 / Philippines
16/034/2013 12:34:39 - INFO - Preparing files for flashing
16/034/2013 12:34:53 - INFO - Please connect your device into flashmode.
16/035/2013 12:35:53 - INFO - Device connected in flash mode
16/035/2013 12:35:54 - INFO - Opening device for R/W
16/035/2013 12:35:54 - INFO - Reading device information
16/035/2013 12:35:54 - INFO - Phone ready for flashmode operations.
16/035/2013 12:35:54 - INFO - Current device : C2105 - ZH8000Z963 - 1271-3303_R5A - 1269-5420_15.0.A.1.36 - WORLD-i_15.0.A.1.36
16/035/2013 12:35:54 - INFO - Start Flashing
16/035/2013 12:35:54 - INFO - Processing loader
16/035/2013 12:35:54 - INFO - Checking header
16/035/2013 12:35:54 - INFO - Flashing data
16/035/2013 12:35:54 - INFO - Loader : S1_Root_dbe9 - Version : loader_MSM8X30_10 / Bootloader status : ROOTABLE
16/035/2013 12:35:54 - INFO - Processing partition-image.sin
16/035/2013 12:35:54 - INFO - Checking header
16/035/2013 12:35:54 - INFO - Flashing data
16/035/2013 12:35:54 - INFO - Processing kernel.sin
16/035/2013 12:35:54 - INFO - Checking header
16/035/2013 12:35:54 - INFO - Flashing data
16/035/2013 12:35:56 - INFO - Processing fotakernel.sin
16/035/2013 12:35:56 - INFO - Checking header
16/035/2013 12:35:56 - INFO - Flashing data
16/035/2013 12:35:57 - INFO - Processing modem.sin
16/035/2013 12:35:57 - INFO - Checking header
16/035/2013 12:35:57 - INFO - Flashing data
16/036/2013 12:36:05 - INFO - Processing rpm.sin
16/036/2013 12:36:05 - INFO - Checking header
16/036/2013 12:36:05 - INFO - Flashing data
16/036/2013 12:36:05 - INFO - Processing ftma.sin
16/036/2013 12:36:05 - INFO - Checking header
16/036/2013 12:36:05 - INFO - Flashing data
16/036/2013 12:36:06 - INFO - Processing ramdumper.sin
16/036/2013 12:36:06 - INFO - Checking header
16/036/2013 12:36:06 - INFO - Flashing data
16/036/2013 12:36:06 - INFO - Processing cache.sin
16/036/2013 12:36:06 - INFO - Checking header
16/036/2013 12:36:06 - INFO - Flashing data
16/036/2013 12:36:07 - INFO - Processing system.sin
16/036/2013 12:36:07 - INFO - Checking header
16/036/2013 12:36:07 - INFO - Flashing data
16/038/2013 12:38:49 - INFO - Processing userdata.sin
16/038/2013 12:38:49 - INFO - Checking header
16/038/2013 12:38:49 - INFO - Flashing data
16/038/2013 12:38:54 - INFO - Ending flash session
16/038/2013 12:38:54 - INFO - Flashing finished.
16/038/2013 12:38:54 - INFO - Please unplug and start your phone
16/038/2013 12:38:54 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
16/038/2013 12:38:54 - INFO - Device connected in flash mode
16/039/2013 12:39:13 - INFO - Device disconnected
16/039/2013 12:39:57 - INFO - Device connected in flash mode
16/040/2013 12:40:38 - INFO - Please connect your device into flashmode.
16/040/2013 12:40:39 - INFO - Opening device for R/W
16/040/2013 12:40:39 - INFO - Device connected in flash mode
16/040/2013 12:40:39 - INFO - Reading device information
16/040/2013 12:40:39 - INFO - Phone ready for flashmode operations.
16/040/2013 12:40:39 - INFO - Current device : C2105 - ZH8000Z963 - 1271-3303_R5A - 1269-5420_15.0.A.1.36 - WORLD-i_15.0.A.1.36
16/040/2013 12:40:39 - INFO - Processing loader
16/040/2013 12:40:39 - INFO - Checking header
16/040/2013 12:40:39 - INFO - Flashing data
16/040/2013 12:40:40 - INFO - Loader : S1_Root_dbe9 - Version : loader_MSM8X30_10 / Bootloader status : ROOTABLE
16/040/2013 12:40:40 - INFO - Start Reading unit 000008B2
16/040/2013 12:40:40 - INFO - Reading TA finished.

Tested By Me

Here Flasher Link:-

Flashtool-0.9.11.0-windows

Here Firmware Link:-

Sony Xperia L (C2105)_15.3.A.0.26_Philippines.part1

Sony Xperia L (C2105)_15.3.A.0.26_Philippines.part2

Or

C2105_15.0.A.2.17_PT. TELETAMA ARTHA MANDIRI.part1

C2105_15.0.A.2.17_PT. TELETAMA ARTHA MANDIRI.part2

Thursday, August 28, 2014

Nokia 7500 camera Problem with Jumper Solution

Nokia 7500 camera solution

Sunday, August 24, 2014

How to Update Samsung Galaxy Fame S6810L with Android 4 1 2 UBANA1 Jelly Bean Official Firmware Using Odin Guide

The Latin America version of Samsung Galaxy Fame with model number GT-S6810L has already received the latest Android 4.1.2 Jelly Bean Over-The-Air (OTA) update with firmware build number S6810LUBANA1. The new official firmware is currently available for users in Argentina.
Firmware details
PDA: S6810LUBANA1
CSC: S6810LPSPANA2
MODEM: S6810LUBAML1
Version: Android 4.1.2
Build date: Jan 02, 2014
Regions: Argentina
Samsung Galaxy Fame S6810L users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Fame on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Fame should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.1.2 UBANA1 Jelly Bean firmware is compatible only with Samsung Galaxy Fame (GT-S6810L). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Fame by navigating to Settings >> About Phone.

Files Required
1. Android 4.1.2 UBANA1 Jelly Bean Firmware for Galaxy Fame S6810L
2. Odin 3.07
Related Article:How to Update Galaxy Fame S6810 with Android 4.1.2 XXAMJ1 Jelly Bean Official Firmware Steps to Update Galaxy Fame S6810L with Android 4.1.2 UBANA1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Fame.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Fame to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted S6810LUBANA1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Fame S6810L should be now updated with Android 4.1.2 UBANA1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Fame S6810L stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Fame S6810 running on Android 4.1.2 Jelly Bean firmware.

Wednesday, August 13, 2014

How to esay Update Galaxy S3 I9300 with Android 4 3 XXUGML2 Jelly Bean Official Firmware

Samsung Galaxy S3 (GT-I9300) users in Switzerland just got the Android 4.3 Jelly Bean update to the latest firmware build number I9300XXUGML2. New official firmware and is currently available as an Over-The-Air (OTA) update via Samsung Kies as well.

Update firmware
PDA: I9300XXUGML2
CSC: I9300AUTGML1
MODEM: I9300XXUGMK6
Version: Android 4.3
Build date: December 13, 2013
Regional: Switzerland

users of Samsung Galaxy S3 I9300 who missed the OTA update notification or can not access the update via Samsung Kies, and those who live outside the area supported can now download and install the same manually, using a step-by-step guide.

Pre-requisites

1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.3 XXUGML2 Jelly Bean firmware is compatible only with the international version of Samsung Galaxy S3 (GT-I9300). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

Files Required

Android 4.3 XXUGML2 Jelly Bean Firmware (Mirror Link) for Galaxy S3 I9300
Odin 3.07

Steps to Update Galaxy S3 I9300 with Android 4.3 XXUGML2 Jelly Bean Firmware

Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy S3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 7: Select the following files in Odin from extracted I9300XXUGML2 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S3 I9300 should be now updated with official Android 4.3 XXUGML2 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S3 I9300 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.