One of All Gsm Solution

Showing posts with label install. Show all posts

Saturday, October 25, 2014

How to install Clockworkmod CWM Recovery on Verizon Samsung Galaxy S3 I535

This guide helps to flash CWM Recovery image for the root users on their Verizon Galaxy S III smartphone (model number I535). In this article if you’ll read all the instructions above presented, you’ll be able to install the ClockworkMod Recovery in one easy and friendly way normally if you’re an advanced Android user.
If your Android phone was rooted then is important to install CWM Recovery,this thing helps root android phone owners to install and custom ROMs, with CMW Recovery you’ll add new functions in the administration on your phone, will improve the performances with new options in a unique look and give you control to do everything you want in your Galaxy S3 without restrictions.
This tutorial is available only if you have a rooted Galaxy S3 on Verizon, be sure to apply all this information showed in this guide to make a good configuration for preparing your computer and your smartphone which you’ll needs for installation process .

Below we have what its need to know before make the CWM Recovery on Verizon S3 phone installation:

First step is to root your devices using the guide for: Root Verizon Samsung Galaxy S3 I535 .
Now enable USB debugging option on your Samsung Galaxy S3 device.
Go to charge the smartphone’s battery, is important because if your phone going to power OFF while flashing the ClockworkMod is very bad for your device.
Now disable the antivirus protection and antimalware programs which running on your phone.
Use this CMW Recovery installation only on Verizon Samsung Galaxy S3 devices with the I535 model number.
This guide should be applied only by advanced Android users. If you don’t have enough experience with the advanced configuration in Android operating systems, you should read this tutorial multiple times, and be sure that you know exactly how to apply this instruction on your devices. Also we recommend reading other tutorials more detailed in the same subject.

Disclaimer: Follow all the instructions carefully mentioned in this article, we should not be held responsible in any manner if you damage your device during the installation of custom recovery image and you should know that you’re applying these changes at your own risk.

Now you can start installing the custom recovery image file. If you cannot install CWM please feel free to ask for our help in comments section. But explain exactly step by step your problem.

Guide to “How to install Clockworkmod Recovery on Verizon Samsung Galaxy S3 I535”

First download the CWM recovery image file from HERE
Now connect your smartphone to your PC use the original USB cable.
Copy the recovery.img file on your Galaxy S III Verizon on internal SDcard, be carefully, don’t make another new folder, just drag and drop the file on the internal SDcard on main folder.
Now disconnect your phone device from your PC.
Go to download and then install Terminal Emulator application on your smartphone from Google Play Store download .
Now launch application the Terminal Emulator.
In the Terminal Emulator app enter the next command: su
Tap ‘Allow/ Grant’ button to allow root access for TE.
Enter following command to install the CWM Recovery file: dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (this command will install the Clockworkmod Recovery on your device).
Now test to see if was successfully installed. Type this command in Terminal Emulator app: reboot recovery
Your device will restart into CWM Recovery menu and now you can use it to flash new custom ROMs and other file and applications.

Note: If you want to restart your Galaxy S3 Verizon phone into normal Android mode, please select the ‘reboot system now’ option from the CWM Recovery main menu and now wait for doing this process.

Now your phone has CWM Recovery installed. If you have problems and you didn’t manage to flash the files, feel free to ask us in comments section and let us to know step by step all the details and we will try to help you to complete the installation.

Remember you’ve installed this all files at your own risk and you shouldn’t blame us in case your smartphone got damage or you lost any files during the installation

Wednesday, September 10, 2014

Samsung Galaxy Mega 5 8 I9152 with Android 4 2 2 XXUANA1 Jelly Bean Official Firmware Install Easily Using Odin Guide

Samsung Galaxy Mega 5.8 with Dual SIM card slot (GT-I9152) has received the latest Android 4.2.2 Jelly Bean update with firmware build number I9152XXUANA1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: I9152XXUANA1
CSC: I9152OXEANA1
MODEM: I9152XXUANA1
Version: Android 4.2.2
Build date: Jan 28, 2014
Regions: Russia, Kazakhstan, Ukraine, Uzbekistan
Samsung Galaxy Mega 5.8 I9152 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Mega 5.8 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Mega 5.8 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUANA1 Jelly Bean firmware is compatible only with the Samsung Galaxy Mega 5.8 (GT-I9152). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Mega 5.8 by navigating to Settings >> About Phone.
Files Required
1. Android 4.2.2 XXUANA1 Jelly Bean Firmware (Mirror Link) for Galaxy Mega 5.8 I9152
2. Odin 3.07

Steps to Update Galaxy Mega 5.8 I9152 with Android 4.2.2 XXUANA1 Jelly Bean Firmware
Related Article:Samsung Galaxy Mega 5.8 I9152 with Android 4.2.2 XWUANA6 Jelly Bean Official Firmware & How to Update Using Odin Guide
Samsung Galaxy Mega 5.8 I9152 with Android 4.2.2 XWUANA5 Jelly Bean Official Firmware & Install Odin Guide
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Mega 5.8.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Mega 5.8 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9152XXUANA1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy Mega 5.8 I9152 should be now updated with Android 4.2.2 XXUANA1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy Mega 5.8 I9152 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Mega 5.8 I9152 running on Android 4.2.2 Jelly Bean firmware.

Wednesday, August 20, 2014

How To Install UBUAML2 Android 4 2 2 Jelly Bean Firmware on Galaxy Mega 5 8 I9150 Guide

Samsung launches Android 4.2.2 UBUAML2 official firmware update for the Galaxy mega Jelly Bean 5.8 GT - I9150. The firmware update is launched in various countries in the region including Argentina Brazil and Colombia, and also can be downloaded for manual updates. You can also update your device firmware via Kies or OTA update. Because the device comes with Android 4.2.2 Jelly Bean out of the box, this new firmware update just brings bug fixes and performance tweaks. Continue reading this guide to learn how to get an official stock I9150UBUAML2 Jelly Bean Android 4.2.2 firmware running on the Galaxy mega 5.8 GT - I9150.

Warning:

This tutorial is only for Galaxy Mega 5.8 GT-I9150. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

Backup your device data. You can follow our ultimate backup guide.
Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.
You already have USB Driver Installed for Galaxy Mega 5.8 GT-I9150 in your PC. [Download USB Drivers]
Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Mega 5.8 GT-I9150. Guide

How To Update Galaxy Mega 5.8 GT-I9150 via OTA

First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
Now, go to Android app drawer and then select Settings.
Then locate About Device and tap on it.
Next select Software update from About device screen.
Then tap on Update option.
You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
Soon your device will reboot to complete the installation process.

If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Mega 5.8 GT-I9150 via Kies

Make sure you have stable internet connection on your computer.
Now download and install Samsung Kies on your computer.
Turn on your device (if it off) and then connect it to computer with USB cable.
Run Samsung Kies and wait for it to detect your device.
You should see a New Firmware Upgrade is available at Samsung Kies home screen.
Press the Firmware Upgrade button to proceed.
Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.

Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

I9150UBUAML2 Android 4.2.2 Jelly Bean Firmware Downloads

Argentina: I9150UBUAML2 I9150UUBAML2_ARO.zip

Colombia (Comcel): I9150UBUAML2 I9150UWAAML2_COM.zip

How To Install I9150UBUAML2 Android 4.2.2 Jelly Bean On Galaxy Mega 5.8 GT-I9150 Manually

Download Odin v3.09.
Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy Mega 5.8 GT-I9150 in Download Mode by pressing and holding down the Home &Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that .tar.md5 file that you get in Step 2. If you are using old Odin then add the file to PDA button.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy Mega 5.8 GT-I9150 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Congrats! You just updated your Galaxy Mega 5.8 GT-I9150 to Android 4.2.2 Jelly Bean firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy Mega 5.8 GT-I9150

If Galaxy Mega 5.8 GT-I9150 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:

Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option

Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.2.2 Jelly Bean experience.

Sunday, August 17, 2014

Guide How To Install Custom Recoveries in Any Android devices

You must have a supported version of custom recovery installed to flash your favorite ROM. Two most renowned name in custom recovery is ClockworkMod recovery and TWRP recovery. However, there are few other free recoveries that mainly based on CWM recovery or TWRP recovery such as SafeStrap, Boot Menu Manager (BMM) or Philz Touch recovery. As said already, you require to have latest supported custom recovery if you want to do advance task such as installation of latest custom ROMs or MODs. Before contenuing how to install latest version of ClockworkMod recovery or TWRP recovery easily, we first need to know little bit about stock recovery.
“Nearly all Android devices ship with a recovery console that is basically a partition on the device’s internal memory and can be booted into. The stock recovery of almost all Android devices provides a few basic yet handy options that allow you to factory reset your device and also to recover its operating system using an official ROM in zip format, but that’s all you can do with it. That’s where a custom recovery comes handy.”

Recommended Reading: Framaroot–Root Many Android Devices Without PC–How To–Tutorial
A custom recovery replace stock recovery and with this it bring various advance functions that stock recovery don’t have. With the help of custom recovery, you can install both official (stock firmware) and unofficial ROMs as well as other updates including apps, themes, kernels etc. by flashing zip files, can wipe not just user data but pretty much every partition on your device, mount the storage card for USB mass storage access without leaving recovery, partition your SD card, wipe Dalvik cache and battery stats, fix permissions, perform, manage and restore backups and so on. However, custom recovery mostly used for flashing or installing new ROMs and Gapps.
ClockworkMod recovery which developed by Kush, is the first custom recovery that catch the attention. The earlier version of CWM recovery don’t comes with touch feature (but now available in touch supported version) and to fulfill the gap the first touch supported custom recovery TWRP introduced. Recently, developer Phil3759 rolled out an advance version of CWM recovery which we call PhilZ Touch 6 Recovery. It remove the boaringness of custom recovery by offering various colourful customization features.
In this page I will offer you an easy to follow installation guide of CWM recovery (currently the latest version is 6.0.4.7) and TWRP recovery (currently the latest version is 2.6.3.3). PhilZ Touch 6 Recovery comes with different installation option for various manufactured models, that’s why I unable to offer a guide on it. The installation guide I discussed here require a rooted device, so you must have a rooted Android smartphone or tablet. This tutorial should work most devices including latest Galaxy S4, Xperia Z or HTC One.

How To install latest CWM recovery on Most Android devices

Download and install ROM manager app from Play Store. It’s available for free.
Then tap on Recovery Setup and select ClockworkMod Recovery under Install or Update Recovery.
Next confirm your device and in very next screen tap on Flash ClockworkMod Recovery.
The app then download the recovery from internet and then ask for Superuser permission. Allow the app Superuser permission and wait till you see a Success massage.
Now go back to ROM Manager main screen and tap on Reboot into Recovery. Confirm your action and soon your Android device boot into ClockworkMod recovery non-touch version. For need to purchase the touch version or find a flashable copy of it.

That’s it! Your Android device now have latest version (that available for your device through ROM Manager) of CWM recovery installed. You can jump between recovery option through volume rocker and select an option using Power button (in some cases Home button).If you bought the touch version then you can operate through touch. One thing you should note, ROM Manager only offer latest officially supported version of recovery. You can always flash unofficially released CWM recovery to obtain a newer version.

How To install latest TWRP recovery on Most Android devices

You already learned installation steps for CWM recovery. Now, if you want a touch enabled custom recovery and unable to purchase or find touch version of CWM recovery for your device then try TWRP recovery aka TeamWin Recovery Project.One thing I like about TWRP is the User Interface. The big icons really come handy.

Download and install GooManager app from Play Store. It’s available for free.
Now open GooManager app then hit Menu button and later tap on Install OpenRecoveryScript from pop-up menu.
Then confirm your action and follow on screen instruction. Select right device if various variant available. The app then download an .img file of TWRP and install it on your device.
Once done, tap on Reboot recovery to boot into recovery. Confirm your action and soon you will see touch enabled TWRP screen.

That’s it. You now know how to flash custom recovery such as ClockworkMod recovery or TWRP on your Android device. Once done, go and find some custom ROM to enjoy your first modified OS experience.

An interesting note is, recently developer DsLNeXuS from XDA develop an App called Recovery Tool which find and flash latest version of your choice of recovery between CWM recovery and TWRP. This way you can save your precious time. However, since the app is very new, you may not see support for all devices that you own. The app also allow you to flash a recovery from your phone’s internal or external memory.

Source 1, 2, 3, 4