One of All Gsm Solution

Showing posts with label 5. Show all posts

Wednesday, September 10, 2014

Samsung Galaxy Mega 5 8 I9152 with Android 4 2 2 XXUANA1 Jelly Bean Official Firmware Install Easily Using Odin Guide

Samsung Galaxy Mega 5.8 with Dual SIM card slot (GT-I9152) has received the latest Android 4.2.2 Jelly Bean update with firmware build number I9152XXUANA1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: I9152XXUANA1
CSC: I9152OXEANA1
MODEM: I9152XXUANA1
Version: Android 4.2.2
Build date: Jan 28, 2014
Regions: Russia, Kazakhstan, Ukraine, Uzbekistan
Samsung Galaxy Mega 5.8 I9152 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Mega 5.8 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Mega 5.8 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUANA1 Jelly Bean firmware is compatible only with the Samsung Galaxy Mega 5.8 (GT-I9152). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Mega 5.8 by navigating to Settings >> About Phone.
Files Required
1. Android 4.2.2 XXUANA1 Jelly Bean Firmware (Mirror Link) for Galaxy Mega 5.8 I9152
2. Odin 3.07

Steps to Update Galaxy Mega 5.8 I9152 with Android 4.2.2 XXUANA1 Jelly Bean Firmware
Related Article:Samsung Galaxy Mega 5.8 I9152 with Android 4.2.2 XWUANA6 Jelly Bean Official Firmware & How to Update Using Odin Guide
Samsung Galaxy Mega 5.8 I9152 with Android 4.2.2 XWUANA5 Jelly Bean Official Firmware & Install Odin Guide
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Mega 5.8.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Mega 5.8 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9152XXUANA1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy Mega 5.8 I9152 should be now updated with Android 4.2.2 XXUANA1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy Mega 5.8 I9152 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Mega 5.8 I9152 running on Android 4.2.2 Jelly Bean firmware.

Wednesday, August 20, 2014

How To Install UBUAML2 Android 4 2 2 Jelly Bean Firmware on Galaxy Mega 5 8 I9150 Guide

Samsung launches Android 4.2.2 UBUAML2 official firmware update for the Galaxy mega Jelly Bean 5.8 GT - I9150. The firmware update is launched in various countries in the region including Argentina Brazil and Colombia, and also can be downloaded for manual updates. You can also update your device firmware via Kies or OTA update. Because the device comes with Android 4.2.2 Jelly Bean out of the box, this new firmware update just brings bug fixes and performance tweaks. Continue reading this guide to learn how to get an official stock I9150UBUAML2 Jelly Bean Android 4.2.2 firmware running on the Galaxy mega 5.8 GT - I9150.

Warning:

This tutorial is only for Galaxy Mega 5.8 GT-I9150. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

Backup your device data. You can follow our ultimate backup guide.
Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.
You already have USB Driver Installed for Galaxy Mega 5.8 GT-I9150 in your PC. [Download USB Drivers]
Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Mega 5.8 GT-I9150. Guide

How To Update Galaxy Mega 5.8 GT-I9150 via OTA

First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
Now, go to Android app drawer and then select Settings.
Then locate About Device and tap on it.
Next select Software update from About device screen.
Then tap on Update option.
You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
Soon your device will reboot to complete the installation process.

If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Mega 5.8 GT-I9150 via Kies

Make sure you have stable internet connection on your computer.
Now download and install Samsung Kies on your computer.
Turn on your device (if it off) and then connect it to computer with USB cable.
Run Samsung Kies and wait for it to detect your device.
You should see a New Firmware Upgrade is available at Samsung Kies home screen.
Press the Firmware Upgrade button to proceed.
Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.

Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

I9150UBUAML2 Android 4.2.2 Jelly Bean Firmware Downloads

Argentina: I9150UBUAML2 I9150UUBAML2_ARO.zip

Colombia (Comcel): I9150UBUAML2 I9150UWAAML2_COM.zip

How To Install I9150UBUAML2 Android 4.2.2 Jelly Bean On Galaxy Mega 5.8 GT-I9150 Manually

Download Odin v3.09.
Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy Mega 5.8 GT-I9150 in Download Mode by pressing and holding down the Home &Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that .tar.md5 file that you get in Step 2. If you are using old Odin then add the file to PDA button.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy Mega 5.8 GT-I9150 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Congrats! You just updated your Galaxy Mega 5.8 GT-I9150 to Android 4.2.2 Jelly Bean firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy Mega 5.8 GT-I9150

If Galaxy Mega 5.8 GT-I9150 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:

Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option

Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.2.2 Jelly Bean experience.

Sunday, August 17, 2014

Nokia 3100 5 repair solution

Saturday, August 9, 2014

Samsung Galaxy S4 Android 4 2 2 Jelly Bean System Dump leaked firmware build I9500XXUAMCH confirms Exynos 5 Octa model

The Galaxy S4 should be released worldwide late April/ early May but, it seems like developers and hackers started to get their hands of devices already. The I9500XXUAMCH firmware files have been leaked and it confirms the Android 4.2.2 JDQ39 Jelly Bean as stock ROM.
The entire System of the Samsung Galaxy S4 I9500 is huge, as it measures 2.2 GB when unpacked and it will take some time before the download is complete. The zip file measure exactly 1549.8 MB and if you’re a development enthusiast then you should take a look at this S4 system dump and learn a thing or two about the software used for this device. The I9500XXUAMCH build is listed as March 23rd and it uses the Android 4.2.2 JDQ39 firmware. The file has been posted by SamMobile. The source post also features the Galaxy S4 build.prop files and some screenshots of the Galaxy S4 I9500 running the latest Jelly Bean OS.
The system dump is great for the dev community and we’re expecting new SGS4 goodies will be available soon besides the S Voice APK, Ringtones, Wallpapers and Icons. If you want to take a peek at the Galaxy S4 system dump then you should download it from here.
Samsung Galaxy S4 I9500 uses the Exynos 5 Octo-core CPU, 2GB RAM, 5inch Super AMOLED Full HD display, Gorilla Glass 3, 16/ 32 / 64GB internal storage, supports up to 64GB external SD card storage, 13MP camera, Wi-Fi AC, NFC, Infrared port, 2600 mAh battery etc. This is one of the best devices of the first part of 2013, we’re saying that because the end of 2013 will surely bring the new Nexus device which will better, spec-wise.
Download the I9500XXUAMCH system dump of Galaxy S4 and snoot around its files, as you might find some interesting features and release them for all Android enthusiasts out there. Until the smartphone hits the stores worldwide we will get tons of leaks and possibly even some new custom ROMs that are based on the SGS4 stock OS.