Showing posts with label display. Show all posts
Showing posts with label display. Show all posts
Wednesday, January 7, 2015
Thursday, December 11, 2014
Samsung S5620 Display Jumper Solutions
Samsung S5620 Display Jumper Hardware Repairing Jumper Solution Solutions
Friday, November 21, 2014
Saturday, November 15, 2014
Nokia 2710 Blank Black and White Screen Display Problem Solution
Heres the solution which covers and possibly help fix nokia 2710 navigation edition Display problems such as blank or black Lcd, blue Lcd, white Lcd, garbled and saturated Lcd display problems.
If ever encountered this kind of problem you may first try to update or restore the device firmware first, and then try to install a new replacement LCD Lcd module.
If all of the above already been done but still the problem still exists, you may then used tjis solution below for hardware troubleshooting procedure on Nokia 2710 PCB board.
You may start checking up the nokia 2710 LCD pin connector, ensure that is absolutely clean.
There are two resistors mounted at the bottom of it, check this two resistors resistance value for it holds the display data signals through to the LCD Lcd. Replace if found damaged.
Check also the LCD Lcd module supply voltages, these are 2.8 and 1.8 volts.
If both resistors and supply voltages were okay, you may then suspects that the problem lies on the JUNO chip. Reworking this chip might possibly fix and repair Nokia 2710 display problem issues.
Read More..
If ever encountered this kind of problem you may first try to update or restore the device firmware first, and then try to install a new replacement LCD Lcd module.
If all of the above already been done but still the problem still exists, you may then used tjis solution below for hardware troubleshooting procedure on Nokia 2710 PCB board.
Nokia 2710 Display problem solution -hardware repair
You may start checking up the nokia 2710 LCD pin connector, ensure that is absolutely clean.
There are two resistors mounted at the bottom of it, check this two resistors resistance value for it holds the display data signals through to the LCD Lcd. Replace if found damaged.
Check also the LCD Lcd module supply voltages, these are 2.8 and 1.8 volts.
If both resistors and supply voltages were okay, you may then suspects that the problem lies on the JUNO chip. Reworking this chip might possibly fix and repair Nokia 2710 display problem issues.
Tuesday, November 11, 2014
Nokia 110 LCD Display Problem Ways Jumpers
Nokia 110 display problem can be cause of white or blank LCD display.it can be due to water damages or carbon rust.so if you want to solve lcd display problem in nokia 110 look at diagram bellow and follow these simple steps.there are a few different color lines that describe tracks of lcd ways.
![]( "Nokia")
remove lcd and clean points on board with electronics cleaner.Clean also resistance and parts as shown in above diagram.try to re sold this lcd and if display can not be in original condition replace it with new LCD.
you can check all these tracks with multi meter and if any of them is not working or missing apply these jumpers.print number 10 and 11 are used for light function so if lcd light is not working or is blank then check these two prints.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Read More..
remove lcd and clean points on board with electronics cleaner.Clean also resistance and parts as shown in above diagram.try to re sold this lcd and if display can not be in original condition replace it with new LCD.
you can check all these tracks with multi meter and if any of them is not working or missing apply these jumpers.print number 10 and 11 are used for light function so if lcd light is not working or is blank then check these two prints.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Monday, November 3, 2014
Nokia 5130 LCD Display jumper ways solution
Heres the LCD Display line paths tracing guide for heavy a and deep troubleshooting Nokia 5130 LCD Screen Display problem such white screen, blue screen, blank or black screen, garbled and saturated screen displays. This solution shows the exact location where each corresponding LCD pin connector connected to a particular components for easy line tracing procedures.
This first solution shows the voltage supply to the LCD display module that feeds to the pin connector. You may check, trace this particular voltages first.this also includes the LCD display backlight LED corresponding current and voltage pin configuration. If this voltages are not present this will also result to display problem issues.
And this solution corresponds to each and every LCD display data signals connection to the pin connector that being feeds from the application processor (CPU IC) through to the LCD display module.
All these lines is connected to an Filter chip resistors that have a resistance value of 33 ohms per each resistor.You may check, trace, replace this particular chip resistor if found damaged. And if found an open line paths, just try to manage applying a jumper wire on it for that is the only option.
This first solution shows the voltage supply to the LCD display module that feeds to the pin connector. You may check, trace this particular voltages first.this also includes the LCD display backlight LED corresponding current and voltage pin configuration. If this voltages are not present this will also result to display problem issues.
Nokia 1800 and Nokia 1616 Solution to fix Charger Not Supported on
Nokia 5310 Xpressmusic LCD display supply voltage
and baclight LEDs pin connections
And this solution corresponds to each and every LCD display data signals connection to the pin connector that being feeds from the application processor (CPU IC) through to the LCD display module.
Nokia 5130 LCD display pin connection configuration ( display jumper ways )
All these lines is connected to an Filter chip resistors that have a resistance value of 33 ohms per each resistor.You may check, trace, replace this particular chip resistor if found damaged. And if found an open line paths, just try to manage applying a jumper wire on it for that is the only option.
Sunday, November 2, 2014
Nokia X6 LCD Display Problem Full Solution
Heres a solution that can be used to fix and repair Nokia X6 Display problem issues like white Lcd, blue Lcd, blank Lcd, garbled and saturated Lcd displays.. This solution may help if having a LCD display problems and already tried to upgrade or restore the device firmware and replaced it with a new LCD module replacements but the problem still exists. 
There are two voltage supply that also need to the LCD display to work, the 1.8 volts and 2.78 volts.The solution above alao shows particular components that needs to check and replace if found faulty or damaged like the Display ESD-EMI filter IC.
If those supply voltages seems to be okay and the LCD display ESD-EMI filter IC is working well and already been checked and replaced the solution below shows the next components that also needs to check, rework or replace. On Nokia X6 there is a display controller IC that is being used and connected on the LCD display circuit.
If the LCD display controller chip become faulty or damaged this will also result to a display problem issues on Nokia X6. But before trying to reflow, rework or replaced you need to check first the three filter coils connected near to it and trace each line paths to the LCD pin connector.
Nokia X6 LCD Display solution
If those supply voltages seems to be okay and the LCD display ESD-EMI filter IC is working well and already been checked and replaced the solution below shows the next components that also needs to check, rework or replace. On Nokia X6 there is a display controller IC that is being used and connected on the LCD display circuit.
Nokia X6 Display problem solution ( Display controller IC )
Saturday, September 20, 2014
3120c LCD Ways Display how to fix problem
following article. Also you will find Nokia 3120c LCD Ways and Jumpers
information in the diagrams further in this post.
In Nokia 3120c Display Problem can occur because of the faulty LCD
Connector, Display IC or it's bad connection to the Cell Phone's
Motherboard. So first of all you should clean Nokia 3120c LCD
Connector Ways Display IC and Motherboard of the Mobile Phone. If that
does not work then you can replace the LCD Connector and Display IC.
Please Note that we will edit these solutions or add new ones if found
in this page at any time in the future. So feel free to come back any
time on this page to stay up to date.
If you have further Questions please don't hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one
member of our team. Use the information available here at Your Own
Risk. We are not responsible if any harm comes to your device during
the repairing process.
Wednesday, September 17, 2014
Thursday, September 4, 2014
Samsung S5830 Cellular Phone Display Light Not Working fix problem
Sunday, August 10, 2014
Subscribe to:
Posts (Atom)