One of All Gsm Solution

If ever trying to fix Nokia X6 touch Lcd failure issues and youll do replacing the touch plate module, trying to calibrate the touch Lcd setting but unresponsive and restoring, upgrading and flashing the device firmware but nothing happens, the problem still exist and the touch Lcd left unresponsive.
This sometimes happens if the device suffered due to a wet damaged, heavily dropped and any related damaged accidentally done by the user. In this case only a hardware repair may only help solved the problem.
This solution below show the Nokia X6 PCB board components that holds and control the touch Lcd panel to work.

The solution above showed  a Touch Accelerometer chip that   used to sense orientation,  detect direction in multi-access direction of the Touch  Plate module. If the chip is damaged the touch Lcd will not work and remains unresponsive. This chip needs a DC supply voltage of 2.78 volts in this designed on Nokia X6 and also. The 2.78 Dc volts is also feeds and supply the touch plate module.
You may check this supply voltage first before trying to rework, re-ball or replacing the touch accelerometer  chip.

Heres a solution that can be used to fix and repair Nokia X6 Display problem issues like white Lcd, blue Lcd, blank Lcd, garbled and saturated Lcd displays.. This solution may help if having a LCD display problems and already tried to upgrade or restore the device  firmware and  replaced it with a new LCD module replacements but the problem  still exists. There are two voltage supply that also need to the LCD display to work, the 1.8 volts and 2.78 volts.The solution above alao shows particular components that needs to check and replace if found faulty or damaged like the Display  ESD-EMI filter IC.

If those supply voltages seems to be okay and the LCD display ESD-EMI filter IC is working well and already been checked and replaced the solution below shows the next components that also needs to check, rework or replace. On Nokia X6 there is a display controller IC that is being used and connected on the LCD display circuit.
If the LCD display controller chip become faulty or damaged this will also result to a display problem issues on Nokia X6. But before trying to reflow, rework or replaced you  need to check first the three filter coils connected near to it and trace each line paths to the LCD pin connector.

Nokia X6 Full PCB Diagram Mother Board.
Here is the diagram of Nokia X6 PCB.so i will add some more diagram in high resolution so that you can add some more repairing trick for

 Nokia X6 if you find some new repairing techniques please must email me and i will post that diagram with your reference in this way we all make it possible “REPAIRING MADE EASY” the basic point of fixallgsm.blogspot.com
Thanks